Tamarack Solar

How to Choose

Two numbers drive the choice: how many modules you are mounting and what pipe you are mounting them on. Kits are specified for 1 to 6 modules across one or two posts, in 3.8 inch and 7.2 inch pipe versions — order the kit that matches the schedule-40 pipe you can actually source locally, because the clamps are pipe-diameter specific. Portrait and landscape orientations are not interchangeable; confirm module dimensions against the kit's rail spacing before ordering. For roofs, the tilt leg kits set a fixed tilt on a low-slope or flat surface.

Key Specifications Explained

• Configuration: 1 to 6 modules on 1 or 2 posts
• Pipe size: 3.8 inch and 7.2 inch outer diameter versions, not interchangeable
• Orientation: Portrait and landscape kits are separately specified
• Material: Mill-finish and anodized aluminum with stainless hardware
• Wind and snow: Rated assemblies — confirm the engineering letter for your local load requirements

Shop the Range

Twenty-seven Tamarack SKUs, from individual clamps and tilt legs up to the 6-module 2-post portrait top-of-pole kit at $831.

Frequently Asked Questions

Do these kits include the pole?

No. The pipe or post is sourced locally to your engineering and soil conditions. The kit supplies everything above it.

Can I ground-mount instead of pole-mount?

Yes — Tamarack ground mount kits use the same clamp system with a different substructure. Match the kit to your module count.

Do I need an engineering letter?

Most jurisdictions want one for a ground or pole mount. Tamarack publishes stamped documentation by state; request it before you pull the permit.

Related Categories

• Solar Mounting Hardware
• DIY Solar Mounting Solutions
• Solar Panel Pallets
• Complete Off-Grid Solar Kits