917-540-6070
support@urbansupplyinc.com
Mon-Fri: 9AM - 9PM EST
917-540-6070
support@urbansupplyinc.com
Mon-Fri: 9AM - 9PM EST
917-540-6070
support@urbansupplyinc.com
Mon-Fri: 9AM - 9PM EST
917-540-6070
support@urbansupplyinc.com
Mon-Fri: 9AM - 9PM EST
Solar mounting hardware is the structural layer that holds a photovoltaic array to a roof, pole or ground bed for the twenty-five year life of the system. Urban Supply carries rails, mid and end clamps, L-feet, flashings, splices, grounding lugs and complete pole and ground mount kits from the manufacturers installers specify by name.
Start with the roof or mounting surface, not the panel. Asphalt shingle takes a flashed L-foot; standing seam metal takes a clamp that never penetrates the roof; corrugated metal needs a bracket matched to the rib profile; tile requires a hook or a no-penetration ballast base. Once the attachment is settled, size the rail to your module dimensions and local wind and snow loads, then confirm the clamp fits your module frame height — most fall between 30mm and 40mm.
We stock IronRidge, SnapNrack, Pegasus Solar, Tamarack Solar, S5!, Top Rack Technology, IntegraRack, Rescom, DynoRaxx and PowerField — covering roof, ground, pole and carport mounting.
Bonded splices maintain continuity along a rail run, so most arrays need one lug per continuous rail rather than one per section. Follow the manufacturer's instructions and your local inspector.
Do not. Clamp geometry, rail channel profile and bonding are engineered together, and mixing voids the structural warranty and the UL 2703 listing.
Use a seam clamp such as the S5! range. It attaches without penetrating the roof, so the roof warranty stays intact.
The EG4 Electrical Conduit Box for EG4 48V WallMount Batteries and EG4 Inverters is a mounting hardware supplied by Urban Supply Inc as an authoriz...
View full detailsThe Z-Bracket Solar Panel Mounting Hardware Set, 4 Pack, Mounts One Solar Panel to Roof or Wall is a mounting hardware supplied by Urban Supply Inc...
View full detailsThe SnapNRack - Universal Link is a solar balance-of-system part from SnapNrack, stocked by Urban Supply for solar and storage builds.Why It Matter...
View full detailsThe SnapNrack - Add-A-Lip Box Frame Adapter - Black is a PV cable and connector component from SnapNrack, stocked by Urban Supply for solar and sto...
View full detailsThe Iron Ridge - Grounding Lug - Low Profile is a solar mounting component from Iron Ridge, stocked by Urban Supply for solar and storage builds.Wh...
View full detailsThe Pegasus Solar - Ground Lug is a solar mounting component from Pegasus Solar — Function Electrical grounding connector; Wire Compatibility 6.Why...
View full detailsThe Iron Ridge - Bonded Splice - XR100 is a solar mounting component from Iron Ridge, stocked by Urban Supply for solar and storage builds.Why It M...
View full detailsThe Iron Ridge - Bonded Splice - XR10 is a solar mounting component from Iron Ridge, stocked by Urban Supply for solar and storage builds.Why It Ma...
View full detailsThe Briggs & Stratton SimpliPHI 6.6 Wall Base is a solar mounting component from Briggs & Stratton — Compatibility SimpliPHI 6.6; Battery S...
View full detailsThe Top Rack - Skirt - 7.54ft is a solar mounting component from Top Rack Technology — Compatible With Standard Module Frames Works with solar pane...
View full detailsThe Top Rack - Rail Base - TRT 02 is a solar mounting component from Top Rack Technology — Material Aluminum 6005-T5; Finish Black anodized.Why It ...
View full detailsThe Top Rack - Rail - Black - 7.54ft - TRT 02 is a solar mounting component from Top Rack Technology — Material Aluminum 6005-T5; Finish Black anod...
View full detailsThe Tamarack Solar - Mid Clamp - 38-72in Modules - 35-IN - UNI-PGRM-MID is a solar mounting component from Tamarack Solar — Length 35 in; Compatibl...
View full detailsThe Tamarack Solar - Mid Clamp - 72-96in Modules - 47-IN - UNI-PGRM-MID47 is a solar mounting component from Tamarack Solar — Length 35 in; Compati...
View full details
Tamarack Solar - Ground Mount - 3-IN Swivel T-Fitting - Galvanized Steel - For Cross Bracing - 90699
The Tamarack Solar - Ground Mount - 3-IN Swivel T-Fitting - Galvanized Steel - For Cross Bracing - 90699 is a solar mounting component from Tamarac...
View full detailsThe Tamarack Solar - 5050 Clamp - Black - 30mm - 40mm is a solar mounting component from Tamarack Solar — Fits Thicker Module Frames Designed for f...
View full detailsThe Standing Seam Mini Rail - V2 is a solar mounting component from Rescom, stocked by Urban Supply for solar and storage builds.Why It MattersWind...
View full detailsThe SolaDeck 0399 - Universal Rail Mount is a solar mounting component from SolaDeck — 35 mm; 1000 VDC.Why It MattersWind uplift, not weight, gover...
View full detailsThe SolaDeck 0999-5B - Solar Roof Mount PV Junction Box is a solar mounting component from SolaDeck — 1000 VDC; 115A.Why It MattersMounting compone...
View full detailsThe SolaDeck 0799-5B - Solar Roof Mount PV Junction Box is a solar mounting component from SolaDeck — 600 VDC; 115A.Why It MattersMounting componen...
View full detailsThe SnapNrack - Ultra Rail - UR-45 - End Clamp - Black is a solar mounting component from SnapNrack — System Compatibility SnapNrack; Ultra Rail Se...
View full detailsThe SnapNrack - TopSpeed - Original Mount and Clamp - 242-10005 is a solar mounting component from SnapNrack, stocked by Urban Supply for solar and...
View full detailsThe SnapNRack - Ultra Rail - All Purpose L-Foot - Black - USA is a solar mounting component from SnapNrack — Secure Connection Provides a stable 90...
View full detailsThe SnapNrack - TopSpeed Clamp is a solar mounting component from SnapNrack, stocked by Urban Supply for solar and storage builds.Why It MattersWin...
View full details{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}