917-540-6070
support@urbansupplyinc.com
Mon–Fri 9AM–6PM ET
S5! Metal Roof Mounts
S5! makes the clamps that let you mount to a standing seam metal roof without a single penetration. The clamp grips the seam with setscrews, the roof stays watertight, and the manufacturer's warranty stays intact — which is why S5! is the default on metal roof solar.
Filters
S5! S-5-U
S5!The S-5-U is S-5!'s most widely used standing seam clamp — a structural aluminum attachment that grips the seam with round-point setscrews rather t...
View full detailsS5! RIB BRACKET 1
S5!The S5! RIB BRACKET 1 is a solar mounting component from S5! — PVKIT Material Corrosion-resistant construction with stainless hardware.Why It Matte...
View full detailsS5! S5-N
S5!The S5! S5-N is a solar balance-of-system part from S5!, stocked by Urban Supply for solar and storage builds.Why It MattersManufacturers list spec...
View full detailsS5! S-5-E
S5!The S5! S-5-E is a solar balance-of-system part from S5!, stocked by Urban Supply for solar and storage builds.Why It MattersBalance-of-system part...
View full detailsS5! RibBracket
S5!The S5! RibBracket is a solar mounting component from S5!, stocked by Urban Supply for solar and storage builds.Why It MattersRoof penetrations are...
View full detailsS5! S-5-S
S5!The S5! S-5-S is a solar balance-of-system part from S5!, stocked by Urban Supply for solar and storage builds.Why It MattersManufacturers list spe...
View full detailsS5! CorruBracket
S5!The S5! CorruBracket is a solar mounting component from S5!, stocked by Urban Supply for solar and storage builds.Why It MattersRacking has to outl...
View full detailsS5! S-5-H
S5!The S5! S-5-H is a solar balance-of-system part from S5! — Max Seam Width Up to 0.75” (19 mm); Clamp Design Two-piece.Why It MattersBalance-of-syst...
View full detailsS5! RibBracket 4
S5!The S5! RibBracket 4 is a solar mounting component from S5! — 100 mm; 32 mm.Why It MattersWind uplift, not weight, governs most array attachment de...
View full detailsS5! CORRUBRACKET 100T
S5!The S5! CORRUBRACKET 100T is a solar mounting component from S5!, stocked by Urban Supply for solar and storage builds.Why It MattersRacking has to...
View full detailsS5! CORRUBRACKET 100T PV
S5!The S5! CORRUBRACKET 100T PV is a solar mounting component from S5!, stocked by Urban Supply for solar and storage builds.Why It MattersWind uplift...
View full detailsS5! PROTEABRACKET
S5!The S5! PROTEABRACKET is a solar mounting component from S5! — Rail or Direct-Attach Compatible Supports both rail systems and S-5! PVKIT installat...
View full detailsS5! RibBracket 2
S5!The S5! RibBracket 2 is a solar mounting component from S5! — 100 mm; 1 in.Why It MattersRoof penetrations are where solar installations leak. Flas...
View full detailsS5! RIB BRACKET 3
S5!The S5! RIB BRACKET 3 is a solar mounting component from S5! — 100 mm; 1 in.Why It MattersRacking has to outlive everything bolted to it. Modules c...
View full detailsS5! CORRUBRACKET 500T
S5!The S5! CORRUBRACKET 500T is a solar mounting component from S5!, stocked by Urban Supply for solar and storage builds.Why It MattersRoof penetrati...
View full detailsHow to Choose
Identify the seam profile first, because the clamp is profile-specific. The S-5-U suits most common vertical seams; the S-5-H handles horizontal or T-shaped profiles; the ProteaBracket covers exposed-fastener and corrugated roofs where a seam clamp does not apply. Once the clamp is chosen, PVKIT 2.0 mounts modules directly to the clamps with no rail at all — order edge kits for the perimeter and mid kits for the interior of the array, in black for a low-visibility finish or mill to save cost.
Key Specifications Explained
- Seam clamps: S-5-U for vertical seams, S-5-H for horizontal and T profiles
- PVKIT 2.0: Rail-less direct-attach module mounting, edge and mid variants
- ProteaBracket: For exposed-fastener and corrugated metal roofs
- Penetrations: None on standing seam — setscrew clamping preserves the roof warranty
- Finish: Black and mill anodized options across the PVKIT line
Shop the Range
Nineteen S5! SKUs, all component-priced between roughly $7 and $13, so a full array's attachment cost stays predictable per module.
Frequently Asked Questions
Will S5! void my metal roof warranty?
The opposite is the point — clamping to the seam avoids penetrations, which is what most metal roof warranties actually prohibit. Confirm with your roof manufacturer.
Do I still need rails with PVKIT?
No. PVKIT 2.0 is rail-less; modules attach directly to the clamps. That removes rail cost and weight entirely.
How do I know which clamp fits my seam?
Measure the seam height and profile shape. S5! publishes a clamp selector by roof profile — send us a photo and dimension if you are unsure.