917-540-6070
support@urbansupplyinc.com
Mon–Fri 9AM–6PM ET
Rapid Shutdown Devices
NEC 690.12 requires that a rooftop solar array can be brought to a safe voltage quickly so firefighters are not working over energized DC conductors. Rapid shutdown devices are how that requirement is met, and on most rooftop installs they are not optional.
Filters
Tigo TS4-A-S - Monitoring and Rapid Shutdown - 20A - 700W
Tigo EnergyThe Tigo TS4-A-S - Monitoring and Rapid Shutdown - 20A - 700W is a monitoring and communication device from Tigo Energy — Model TS4-A-S; Functions ...
View full detailsTigo TS4-A-O - Optimization Monitoring and Rapid Shutdown Long Cable - 20 Pack
Tigo EnergyThe Tigo TS4-A-O - Optimization Monitoring and Rapid Shutdown Long Cable - 20 Pack is a monitoring and communication device from Tigo Energy — Opti...
View full detailsTigo TS4-A-O - Optimization Monitoring and Rapid Shutdown Long Cable - 10 Pack
Tigo EnergyThe Tigo TS4-A-O - Optimization Monitoring and Rapid Shutdown Long Cable - 10 Pack is a monitoring and communication device from Tigo Energy — Opti...
View full detailsTigo TS4-A-O - Optimization Monitoring and Rapid Shutdown Long Cable - 5 Pack
Tigo EnergyThe Tigo TS4-A-O - Optimization Monitoring and Rapid Shutdown Long Cable - 5 Pack is a monitoring and communication device from Tigo Energy — Optim...
View full detailsTigo TS4-A-O - Optimization Monitoring and Rapid Shutdown - 22A (Isc) 725W 1500V UL/1000V IEC
Tigo EnergyThe Tigo TS4-A-O - Optimization Monitoring and Rapid Shutdown - 22A (Isc) 725W 1500V UL/1000V IEC is a monitoring and communication device from Tig...
View full detailsTigo TS4-A-2F - 2 Module Rapid Shutdown
Tigo EnergyThe Tigo TS4-A-2F - 2 Module Rapid Shutdown is a solar balance-of-system part from Tigo Energy — Supported 2; Maximum Input Voltage 80V per input.W...
View full detailsTigo TS4-A-O - Optimization Monitoring and Rapid Shutdown Long Cable
Tigo EnergyThe Tigo TS4-A-O - Optimization Monitoring and Rapid Shutdown Long Cable is a monitoring and communication device from Tigo Energy — TS4 Conductor ...
View full detailsTigo TS4-A-F - Rapid Shutdown - 22A
Tigo EnergyThe Tigo TS4-A-F - Rapid Shutdown - 22A is a solar balance-of-system part from Tigo Energy — System Type Module-level rapid shutdown device; NEC Co...
View full detailsTigo RSS Transmitter - Pure Signal Single Core (No Enclosure) - Din Rail Mount
Tigo EnergyThe Tigo RSS Transmitter - Pure Signal Single Core (No Enclosure) - Din Rail Mount is a monitoring and communication device from Tigo Energy, stock...
View full detailsTigo TS4-A-2F - Long Cable - 15A
Tigo EnergyThe Tigo TS4-A-2F - Long Cable - 15A is a PV cable and connector component from Tigo Energy — Built for Safety Fully meets NEC 2017/2020 rapid shut...
View full detailsTigo RSS Transmitter - Pure Signal Dual Core (No Enclosure) - Din Rail Mount
Tigo EnergyThe Tigo RSS Transmitter - Pure Signal Dual Core (No Enclosure) - Din Rail Mount is a monitoring and communication device from Tigo Energy, stocked...
View full detailsSolis S6 7.6kW Single Phase High Voltage Energy Storage Hybrid Inverter - S6-EH1P7.6K-H-US-RSS-RGM
SolisThe Solis S6-EH1P7.6K-H-US-RSS-RGM is a 7.6kW single-phase high-voltage hybrid inverter that supports up to 150kWh of battery per inverter — an unu...
View full detailsHow to Choose
The code sets the outcome, not the product. Module-level electronics — a TS4 cover, a microinverter, or an optimizer with integrated shutdown — bring conductors inside the array boundary to safe voltage on command. You also need an initiator: a labeled, accessible switch that triggers shutdown, usually at the service entrance. Microinverter arrays satisfy the requirement inherently because there is no high-voltage DC on the roof to begin with. Verify the specific device is certified to the SunSpec standard your inverter expects, because a mismatch means the shutdown signal never arrives.
Key Specifications Explained
- Code basis: NEC 690.12; adoption and edition vary by jurisdiction
- Module-level devices: TS4 covers, optimizers and microinverters
- Initiator: Accessible labeled switch, typically at the service disconnect
- Signaling: SunSpec-certified communication between transmitter and devices
- Labeling: Permanent placard at the shutdown point is part of compliance
Brands We Carry
Tigo Energy, Enphase Energy, APsystems and inverter-integrated transmitters from Growatt and Solis.
Frequently Asked Questions
Do microinverters need separate rapid shutdown?
No. Microinverters convert to AC at the module, so there is no high-voltage rooftop DC. They satisfy 690.12 inherently.
Does 690.12 apply to ground mounts?
Generally not — the requirement targets conductors on or in buildings. Confirm with your AHJ, since local amendments vary.
What happens if I skip it?
The install fails inspection and cannot be legally interconnected. It is also a real safety issue for anyone who has to work on the roof.