{"title":"Fenders \u0026 Body Armor","description":"\u003cp\u003eTube fenders, inner fenders, hoods, grilles, doors, hard tops, hood hardware and frame reinforcements for Jeep, Toyota, Ford, Mercedes-Benz Sprinter and Chevy, from DV8 Offroad, C4 Fabrication, ADD, Rago and Flatline Van Co.\u003c\/p\u003e\u003cp\u003eEvery part ships directly from the manufacturer, and Urban Supply is an authorized dealer for these Horsepower Automotive Group brands.\u003c\/p\u003e","products":[{"product_id":"dv8-2021-2025-ford-bronco-rear-inner-fenders-infend-08rb","title":"DV8 Offroad 2021-2025 Ford Bronco Rear Inner Fenders, INFEND-08RB","description":"\u003cp\u003eThe DV8 Offroad Bronco Rear Inner Fenders is made from aluminum and built for 2021-2025 Ford Bronco. Part number INFEND-08RB.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThe DV8 Offroad Rear Inner Fender Liners for the 6th Gen Ford Bronco add protection and a finished look to the rear wheel wells while maintaining clearance for larger tires and upgraded suspension systems. The lightweight aluminum construction features a satin black powder coat finish with raw paintable mesh accents for a customizable appearance. Designed to clear up to 37\" tires with a 2.5-3\" lift and accommodate remote reservoir shocks. Simple bolt-on installation with minor drilling required.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLight Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eSatin Black Powder-Coat Finish with Raw Paintable Mesh Accents\u003c\/li\u003e\n\u003cli\u003eImproved \u0026amp; Simplified Design\u003c\/li\u003e\n\u003cli\u003eHigh Clearance Design to Accept Factory or Aftermarket Suspensions\u003c\/li\u003e\n\u003cli\u003eCan Clear 37\" Tires with 2.5-3\" Lift\u003c\/li\u003e\n\u003cli\u003eCan Accept 35\" Tires with Factory Sasquatch or 2-3\" Lift if Non-Sasquatch\u003c\/li\u003e\n\u003cli\u003eDesigned to Accommodate Remote Reservoir Shocks\u003c\/li\u003e\n\u003cli\u003eDrilling Required for a Simple Bolt-On Installation\u003c\/li\u003e\n\u003cli\u003eNot Compatible with Bronco Raptor, Heritage, or Everglades Trims\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2021-2025 Ford Bronco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Bolt-on-2.5-3\" lift minimum required to accept 37\" tires. Can accept 35\" tires with factory SAS or 2-3\" lift if non-SAS. Minor drilling required. Fitment not confirmed on 2026 models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e Raptor\/Heritage\/Everglades\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e INFEND-08RB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Satin Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 2 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 2.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 23 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 13 x 21 x 39 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1118\/3812\/files\/Installation_Guide_INFEND-08RB_Final.pdf?v=1779120038\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50527966232741,"sku":"INFEND-08RB","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/6th-Gen-Bronco-Rear-Inner-Fenders-Main-Render.jpg?v=1790309374"},{"product_id":"flatline-2019-2026-mercedes-benz-sprinter-van-frame-rail-support-brackets","title":"Flatline Van Co. 2019-2026 Mercedes-Benz Sprinter Van Frame Rail Support Brackets, SP1158B","description":"\u003cp\u003eThe Flatline Van Co. Sprinter Van Frame Rail Support Brackets is built for 2019-2026 Mercedes-Benz Sprinter. Part number SP1158B.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThese brackets give Sprinter 3500 dually owners the mounting point needed to run front-end accessories like the Bull Bar, Skid Plate, and Front Bumper Hitch Adapter. Sold as a pair, they bolt into stock locations in about 30 minutes and are built from 5mm steel with an exterior grade powder coat. Also works as an affordable alternative to OEM part MB# 906-620-36-00 for 2500 owners with damaged or missing brackets.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003cli\u003e5mm steel construction\u003c\/li\u003e\n\u003cli\u003eAlternative to MB part# 906-620-36-00\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2019-2026 Mercedes-Benz Sprinter 1500, Sprinter 2500, Sprinter 3500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e Low Roof, High Roof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCab \/ roof:\u003c\/strong\u003e Low Roof,High Roof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVan length:\u003c\/strong\u003e 144,170,170EXT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Requires minimal drilling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Flatline Van Co.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e SP1158B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Textured Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 1 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 0.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 12 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 5 x 11 x 15 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0086\/8191\/4419\/files\/SP1158B-sprinter-frame-rail-brackets-install-guide.pdf?v=1775772515\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eFlatline Van Co. covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized Flatline Van Co. dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Flatline Van Co.","offers":[{"title":"Default Title","offer_id":50527968788645,"sku":"SP1158B","price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/SP1158B-sprinter-frame-rail-brackets.jpg?v=1790309402"},{"product_id":"dv8-2007-2018-jeep-wrangler-jk-front-inner-fenders-infend-10fb","title":"DV8 Offroad 2007-2018 Jeep Wrangler JK Front Inner Fenders, INFEND-10FB","description":"\u003cp\u003eThe DV8 Offroad Wrangler JK Front Inner Fenders is made from aluminum and built for 2007-2018 Jeep Wrangler. Part number INFEND-10FB.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eFront inner fenders for 2007-2018 Jeep Wrangler JK models designed to help protect engine bay components from trail debris while improving airflow. Constructed from lightweight aluminum with a perforated panel for heat dissipation and finished in a satin black powder coat. Paintable mesh insert allows for customization. Sold as a front left and right pair with bolt-on installation.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eProtects engine components from debris when on the trail\u003c\/li\u003e\n\u003cli\u003eSold as a front pair (Left\/Right)\u003c\/li\u003e\n\u003cli\u003eAluminum perforated panel allows for excess heat to easily dissipate\u003c\/li\u003e\n\u003cli\u003eOur new optimized design\u003c\/li\u003e\n\u003cli\u003ePaintable mesh panel for customization options\u003c\/li\u003e\n\u003cli\u003eBolt-on Installation\u003c\/li\u003e\n\u003cli\u003eMade from lightweight aluminum\u003c\/li\u003e\n\u003cli\u003eSatin Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eNot compatible with some piggyback shocks\u003c\/li\u003e\n\u003cli\u003eNot recommended to use with factory fender flares. Will require significant modification.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2007-2018 Jeep Wrangler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Bolt-on\u003cbr\u003eNot compatible with some piggyback shocks\u003cbr\u003eNot recommended to use with factory fender flares. Will require significant modification.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e INFEND-10FB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Satin Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 2 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 2.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 14 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 11 x 21 x 23 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1118\/3812\/files\/INFEND-10FB_Install_Guide_Final.pdf?v=1771353329\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50527973867685,"sku":"INFEND-10FB","price":379.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/Jeep-Wrangler-JK-Front-Inner-Fenders-1.jpg?v=1790309468"},{"product_id":"dv8-2018-2026-jeep-jl-replacement-ball-joint-kit-dana-30-or-dana-44","title":"DV8 Offroad 2018-2026 Jeep JL Replacement Ball Joint Kit Dana 30 or Dana 44, D-JLBLJNT-01","description":"\u003cp\u003eThe DV8 Offroad JL Replacement Ball Joint Kit Dana 30 or Dana 44 is made from 4140 chromoly and 1045 steel and built for 2018-2026 Jeep Wrangler. Part number D-JLBLJNT-01.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eDV8 Offroad’s Wrangler JL Replacement Ball Joint Kit is a heavy-duty upgrade designed for Dana 30 and Dana 44 axles. Featuring SAE 4140 chromoly studs with rolled threads and an SAE 1045 knurled housing, this kit delivers increased strength and durability over factory components.\u003c\/p\u003e\u003cp\u003eBoth flush and standard grease zerks are included for compatibility with factory and aftermarket axle setups. Greaseable, serviceable boots help extend ball joint life in high-heat and demanding driving conditions. Finished in DV8’s signature green with a laser-etched logo.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSAE4140 Chromoly studs with rolled threads\u003c\/li\u003e\n\u003cli\u003eSAE1045 ultra strong knurled green housing\u003c\/li\u003e\n\u003cli\u003eFlush and standard grease zerk included for those who run aftermarket larger axles\u003c\/li\u003e\n\u003cli\u003eLaser-etched logo within the iconic DV8 green\u003c\/li\u003e\n\u003cli\u003eGreaseable and serviceable boots to help extend the life of the ball joints in high temp and use environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2018-2026 Jeep Wrangler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e D30 and D44 Models. Special tools may be required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e D-JLBLJNT-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 4140 Chromoly and 1045 Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Anodized Green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 4 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 5 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 4 x 9 x 13 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1118\/3812\/files\/D-JLBLJNT-01_Installation_Guide__Final.pdf?v=1770841884\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50527974195365,"sku":"D-JLBLJNT-01","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/Jeep-Wrangler-JL-Replacement-Ball-Joint-Kit-1.jpg?v=1790309473"},{"product_id":"dv8-2007-2018-jeep-wrangler-jk-rear-inner-fenders-infend-10rb","title":"DV8 Offroad 2007-2018 Jeep Wrangler JK Rear Inner Fenders, INFEND-10RB","description":"\u003cp\u003eThe DV8 Offroad Wrangler JK Rear Inner Fenders is made from steel and built for 2007-2018 Jeep Wrangler. Part number INFEND-10RB.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThe DV8 Offroad Jeep Wrangler JK Rear Inner Fenders replace the factory plastic liners with a stronger, satin-black aluminum design. They provide increased protection for the rear wheel wells, include a laser-cut logo for a clean finished look, and come with paintable aluminum mesh for optional customization.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSatin black inner fenders to match your fronts\u003c\/li\u003e\n\u003cli\u003eAluminum design offers much more protection of inner wheel wells over factory plastic\u003c\/li\u003e\n\u003cli\u003eClean simple look to complete your build\u003c\/li\u003e\n\u003cli\u003ePaintable aluminum mesh to mash your personal aesthetic\u003c\/li\u003e\n\u003cli\u003eLaser cut logo to offer a hint of your body color\u003c\/li\u003e\n\u003cli\u003eMinor Drilling required for installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2007-2018 Jeep Wrangler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Minor drilling necessary\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e INFEND-10RB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 2 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 2.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 12 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 10 x 16 x 43 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1118\/3812\/files\/INFEND-10RB_installation_Guide_Final.pdf?v=1763501979\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50527986548901,"sku":"INFEND-10RB","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/Jeep-Wrangler-JK-Rear-Inner-Fenders-1.jpg?v=1790309536"},{"product_id":"flatline-2020-2026-ford-transit-van-hood-strut-kit-tr1109b","title":"Flatline Van Co. 2020-2026 Ford Transit Van Hood Strut Kit, TR1109B","description":"\u003cp\u003eThe Flatline Van Co. Transit Van Hood Strut Kit is made from steel and built for 2020-2026 Ford Transit. Part number TR1109B.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThe Transit Hood Strut Kit replaces the factory prop rod with gas struts that lift and hold the hood automatically. The kit comes with two gas struts and custom brackets that keep the hood open further than the factory prop rod. It’s simple to install with basic tools, and all hardware and instructions are included.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eThe gas struts lift and hold the hood automatically, giving you better access and visibility while keeping it steady and wobble-free. Custom brackets ensure a secure, twist-free fit, and installation is quick and simple with all hardware included.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2020-2026 Ford Transit 150, Transit 250, Transit 350\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCab \/ roof:\u003c\/strong\u003e Mid Roof,High Roof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVan length:\u003c\/strong\u003e 130,148,148EXT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Flatline Van Co.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e TR1109B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Textured\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 2 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 1 hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 3 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 3 x 6 x 11.5 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0086\/8191\/4419\/files\/TR1109B-transit-hood-strut-kit-install-guide.pdf?v=1759342997\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eFlatline Van Co. covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized Flatline Van Co. dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Flatline Van Co.","offers":[{"title":"Default Title","offer_id":50527988088997,"sku":"TR1109B","price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/TR1109B-transit-hood-strut-kit.jpg?v=1790309556"},{"product_id":"dv8-2021-2025-ford-bronco-front-inner-fenders-infend-08fb","title":"DV8 Offroad 2021-2025 Ford Bronco Front Inner Fenders, INFEND-08FB","description":"\u003cp\u003eThe DV8 Offroad Bronco Front Inner Fenders is built for 2021-2025 Ford Bronco. Part number INFEND-08FB.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eOur Front Inner Fenders feature paintable raw aluminum mesh accent panels that allow for increased airflow to the engine. They offer a high-clearance design for compatibility with factory or aftermarket suspension. They can clear 37” tires with a 2.5-3” lift. Our inner fenders are made from aluminum, and they are finished in a satin black powder coat. The install process is fully bolt-on.\u003c\/p\u003e\u003cp\u003e* Please Note: The fenders are compatible with 35” tires with the factory SAS. For non-SAS, your Bronco must have a 2-3” lift to accept 35” tires.\u003c\/p\u003e\u003cp\u003e** Please Note: The inner fenders are not compatible with the Bronco Raptor.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIncreases Airflow to Engine\u003c\/li\u003e\n\u003cli\u003eHigh-Clearance Design\u003c\/li\u003e\n\u003cli\u003ePaintable Raw Aluminum Accent Panels\u003c\/li\u003e\n\u003cli\u003eLightweight \u0026amp; Durable 1.5mm Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eSatin Black Powder Coated Finish\u003c\/li\u003e\n\u003cli\u003eFully Bolt-On Installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2021-2025 Ford Bronco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Bolt-on-2.5-3\" lift minimum required to accept 37\" tires. Can accept 35\" tirees with factory SAS or 2-3\" lift if non-SAS. Minor drilling required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e Bronco Raptor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e INFEND-08FB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 4 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 3.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 28 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 15 x 19 x 41 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1118\/3812\/files\/INFEND-08FB_Installation_Guide_Final.pdf?v=1746134420\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50527998214309,"sku":"INFEND-08FB","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/2021-2025-FordBronco-Front-Inner-Fenders-1.jpg?v=1790309685"},{"product_id":"dv8-2020-2026-jeep-gladiator-jt-armor-fender-flares-fdgl-09","title":"DV8 Offroad 2020-2026 Jeep Gladiator JT Armor Fender Flares, FDGL-09","description":"\u003cp\u003eThe DV8 Offroad Gladiator JT Armor Fender Flares is made from steel and built for 2020-2026 Jeep Gladiator. Part number FDGL-09.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eOur fender flares provide a rigid armor-plated design and a narrow width. The fenders feature paintable aluminum accent panels and bolt-on paintable fender vent logo plates. The front fenders provide plug-n-play LED button style amber turn signals. Each fender flare features a rubber seal. They are made from steel, and are finished in a micro-texture black powder coat. The fenders bolt-on with nutserts.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRigid Armor-Plated Design\u003c\/li\u003e\n\u003cli\u003eNarrow Width\u003c\/li\u003e\n\u003cli\u003ePaintable Mesh Aluminum Accent Panels\u003c\/li\u003e\n\u003cli\u003e(2) Plug-N-Play LED Button Style Amber Turn Signals\u003c\/li\u003e\n\u003cli\u003eRubber Seals to Prevent Dust\/Rock Buildup\u003c\/li\u003e\n\u003cli\u003eBolt-On Paintable Fender Vent Logo Plates\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coated Finish\u003c\/li\u003e\n\u003cli\u003e2.5\/3mm Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2020-2026 Jeep Gladiator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Bolt-on\u003cbr\u003eFRONT REAR\u003cbr\u003eFront: 2.75\" Front: 3\"\u003cbr\u003eMiddle: 5\" Middle: 4.25\"\u003cbr\u003eRear: 5.5\" Rear: 4\"\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e FDGL-09\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 4 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 3.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 100 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 13 x 24 x 56 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1118\/3812\/files\/FDGL-09_Installation_Guide_Final.pdf?v=1740515403\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528001228965,"sku":"FDGL-09","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/JeepGladiatorJTArmorFenderFlares.jpg?v=1790309722"},{"product_id":"dv8-2018-2026-jeep-wrangler-jl-armor-fender-flares-fdjl-09","title":"DV8 Offroad 2018-2026 Jeep Wrangler JL Armor Fender Flares, FDJL-09","description":"\u003cp\u003eThe DV8 Offroad Wrangler JL Armor Fender Flares is made from steel and built for 2018-2026 Jeep Wrangler. Part number FDJL-09.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eOur fender flares feature a rigid armor-plated design and a narrow width. The fenders come with paintable aluminum accent panels and bolt-on paintable fender vent logo plates. Each of the front fenders include plug-n-play LED button style amber turn signals. The fenders’ rubber seal prevents build-up in between the flares and the vehicle body. The fenders bolt-on using nutserts. They are made from steel, and are finished in a micro-texture black powder coat.\u003c\/p\u003e\u003cp\u003e* Please Note: Trimming on the front fender mount is required for installation of the fenders.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTrim Fender Flares w\/ Rigid Armor-Plated Design\u003c\/li\u003e\n\u003cli\u003e(2) Plug-N-Play LED Button Style Amber Turn Signals\u003c\/li\u003e\n\u003cli\u003ePaintable Mesh Aluminum Accent Panels\u003c\/li\u003e\n\u003cli\u003eRubber Seals to Prevent Dust\/Rock Buildup\u003c\/li\u003e\n\u003cli\u003eIncluded Bolt-On Paintable Fender Vent Logo Plates\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coated Finish\u003c\/li\u003e\n\u003cli\u003e2.5\/3mm Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2018-2026 Jeep Wrangler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Bolt-on\u003cbr\u003eFRONT REAR\u003cbr\u003eFront: 2.75\" Front: 3\"\u003cbr\u003eMiddle: 5\" Middle: 4.25\"\u003cbr\u003eRear: 5.5\" Rear: 4\"\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e FDJL-09\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 4 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 3.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 88 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 14 x 27 x 54 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1118\/3812\/files\/FDJL-09_Installation_Guide_Final.pdf?v=1740515429\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528001327269,"sku":"FDJL-09","price":949.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/JeepWranglerJLArmorFenderFlares1.jpg?v=1790309724"},{"product_id":"c4-fab-2010-2024-toyota-5th-gen-4runner-high-clearance-fender-liners","title":"C4 Fabrication 2010-2024 Toyota 5th Gen 4Runner High Clearance Fender Liners, 1100-8410-FL","description":"\u003cp\u003eThe C4 Fabrication 5th Gen 4Runner High Clearance Fender Liners is made from steel and built for 2010-2024 Toyota 4Runner. Part number 1100-8410-FL.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBolt-in aluminum fender liners (some minor drilling required)\u003c\/li\u003e\n\u003cli\u003eDesigned to fit 5th Gen 4Runner 2010-2024\u003c\/li\u003e\n\u003cli\u003eProvide maximum tire clearance while still covering your air intake and door jams\u003c\/li\u003e\n\u003cli\u003eEdge trim gives the liners a tight seal against the fender and keeps debris out\u003c\/li\u003e\n\u003cli\u003eFender trim templates included for perfect fender cut\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2010-2024 Toyota 4Runner\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e C4 Fabrication\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1100-8410-FL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hammer Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 15 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 10 x 10 x 36 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/youtu.be\/paQ2PJ36NiY\" target=\"_blank\" rel=\"noopener\"\u003eInstallation video\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eC4 Fabrication covers this product with a 2-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized C4 Fabrication dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":50528010502309,"sku":"1100-8410-FL","price":549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/5thGen4RunnerHighClearanceInnerFenderLinersCover.jpg?v=1790309809"},{"product_id":"c4-fab-2010-2024-toyota-4runner-oversized-tire-fitment-kit-5th-gen","title":"C4 Fabrication 2010-2024 Toyota 4Runner Oversized Tire Fitment Kit - 5th Gen, 1100-8410-OTF","description":"\u003cp\u003eThe C4 Fabrication 4Runner Oversized Tire Fitment Kit - 5th Gen is made from steel and built for 2010-2024 Toyota 4Runner. Part number 1100-8410-OTF.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThis kit will allow a 5th Gen 4runner a with a 3\" lift to fit 35\" tires with minimal to no rubbing\u003c\/li\u003e\n\u003cli\u003eDesigned for 2010-2024 4Runner\u003c\/li\u003e\n\u003cli\u003eProvides maximum tire clearance while still covering the exposed air intake and doors\u003c\/li\u003e\n\u003cli\u003eEdge trim gives the liners a tight seal against the fender and keeps debris out\u003c\/li\u003e\n\u003cli\u003eIncludes:\u003c\/li\u003e\n\u003cli\u003eHigh Clearance Fender Liners\u003c\/li\u003e\n\u003cli\u003eStick-on Fender Trim Templates\u003c\/li\u003e\n\u003cli\u003eBody Mount Relocation Kit\u003c\/li\u003e\n\u003cli\u003eRequires cutting\/removing factory body mount and welding in a replacement\u003c\/li\u003e\n\u003cli\u003eRequires cutting of factory fenders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2010-2024 Toyota 4Runner\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e C4 Fabrication\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1100-8410-OTF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hammer Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/youtu.be\/paQ2PJ36NiY\" target=\"_blank\" rel=\"noopener\"\u003eInstallation video\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eC4 Fabrication covers this product with a 2-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized C4 Fabrication dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":50528010698917,"sku":"1100-8410-OTF","price":748.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/5thGen4RunnerOTFKitCover.jpg?v=1790309812"},{"product_id":"c4-fab-2005-2015-toyota-tacoma-high-clearance-fender-liners-2nd-gen","title":"C4 Fabrication 2005-2015 Toyota Tacoma High Clearance Fender Liners - 2nd Gen, 1200-8405-FL","description":"\u003cp\u003eThe C4 Fabrication Tacoma High Clearance Fender Liners - 2nd Gen is made from steel and built for 2005-2015 Toyota Tacoma. Part number 1200-8405-FL.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBolt-in aluminum fender liners (some minor drilling required)\u003c\/li\u003e\n\u003cli\u003eDesigned to fit 2nd Gen Tacoma 2005-2015\u003c\/li\u003e\n\u003cli\u003eProvide maximum tire clearance while still covering your air intake and door jams\u003c\/li\u003e\n\u003cli\u003eEdge trim gives the liners a tight seal against the fender and keeps debris out\u003c\/li\u003e\n\u003cli\u003eFender trim templates included for perfect fender cut\u003c\/li\u003e\n\u003cli\u003eFull OTF kit: \u003ca href=\"\/products\/c4-fab-2005-2015-toyota-tacoma-oversized-tire-fitment-kit-1200-8405-otf\" title=\"C4 Fabrication 2005-2015 Toyota Tacoma Oversized Tire Fitment Kit, 1200-8405-OTF\"\u003eC4 Fabrication 2005-2015 Toyota Tacoma Oversized Tire Fitment Kit, 1200-8405-OTF\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eIf you currently have a C4 fabrication overland or hybrid front bumper, your bumper will need to be trimmed by the flare to line up perfectly. Bumper caps are sold separately: \u003ca href=\"\/products\/c4-fab-2005-2015-toyota-2nd-gen-tacoma-c4-bumper-caps\" title=\"C4 Fabrication 2005-2015 Toyota 2nd Gen Tacoma C4 Bumper Caps\"\u003eC4 Fabrication 2005-2015 Toyota 2nd Gen Tacoma C4 Bumper Caps\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2005-2015 Toyota Tacoma\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e C4 Fabrication\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1200-8405-FL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Raw - Unfinished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 15 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 36 x 10 x 10 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/youtu.be\/hDMz3FO1t9I\" target=\"_blank\" rel=\"noopener\"\u003eInstallation video\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eC4 Fabrication covers this product with a 2-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized C4 Fabrication dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":50528019546277,"sku":"1200-8405-FL","price":549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/2ndGenTacomaHighClearanceFenderLinerKitCover.jpg?v=1790309866"},{"product_id":"c4-fab-2005-2015-toyota-tacoma-oversized-tire-fitment-kit-1200-8405-otf","title":"C4 Fabrication 2005-2015 Toyota Tacoma Oversized Tire Fitment Kit, 1200-8405-OTF","description":"\u003cp\u003eThe C4 Fabrication Tacoma Oversized Tire Fitment Kit is made from steel and built for 2005-2015 Toyota Tacoma. Part number 1200-8405-OTF.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThis kit will allow a 2nd Gen Tacoma with a 3\" lift to fit 35\" tires with minimal to no rubbing\u003c\/li\u003e\n\u003cli\u003eDesigned for 2005-2015 Tacoma\u003c\/li\u003e\n\u003cli\u003eProvides maximum tire clearance while still covering the exposed air intake and doors\u003c\/li\u003e\n\u003cli\u003eEdge trim gives the liners a tight seal against the fender and keeps debris out\u003c\/li\u003e\n\u003cli\u003eIncludes:\u003c\/li\u003e\n\u003cli\u003eHigh Clearance Fender Liners\u003c\/li\u003e\n\u003cli\u003eStick-on Fender Trim Templates\u003c\/li\u003e\n\u003cli\u003eBody Mount Relocation Kit\u003c\/li\u003e\n\u003cli\u003eRequires cutting\/removing factory body mount and welding in a replacement\u003c\/li\u003e\n\u003cli\u003eRequires cutting of factory fenders\u003c\/li\u003e\n\u003cli\u003eIf you currently have a C4 fabrication overland or hybrid front bumper, your bumper will need to be trimmed by the flare to line up perfectly. Bumper caps are sold separately: \u003ca href=\"\/products\/c4-fab-2005-2015-toyota-2nd-gen-tacoma-c4-bumper-caps\" title=\"C4 Fabrication 2005-2015 Toyota 2nd Gen Tacoma C4 Bumper Caps\"\u003eC4 Fabrication 2005-2015 Toyota 2nd Gen Tacoma C4 Bumper Caps\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2005-2015 Toyota Tacoma\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e C4 Fabrication\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1200-8405-OTF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Raw - Unfinished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/youtu.be\/79mpoTeIL6Y?list=PLlD75V0_Arb6TQ2bahXjHsVpmdttmWqHZ\" target=\"_blank\" rel=\"noopener\"\u003eInstallation video\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eC4 Fabrication covers this product with a 2-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized C4 Fabrication dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":50528019611813,"sku":"1200-8405-OTF","price":748.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/2ndGenTacomaOversizedTireFitmentKitCover.jpg?v=1790309869"},{"product_id":"c4-fab-2016-2023-toyota-tacoma-high-clearance-fender-liners-3rd-gen","title":"C4 Fabrication 2016-2023 Toyota Tacoma High Clearance Fender Liners 3rd Gen, 1200-8416-FL","description":"\u003cp\u003eThe C4 Fabrication Tacoma High Clearance Fender Liners 3rd Gen is made from steel and built for 2016-2023 Toyota Tacoma. Part number 1200-8416-FL.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eUpgrade your Tacoma with these bolt-in aluminum high clearance fender liners, engineered for 2016–2023 3rd Gen models. Designed to maximize tire clearance without compromising protection, these liners shield your air intake and door jambs while sealing tightly against the fender with included edge trim. Minor drilling required. Comes with fender trim templates for a precise, clean cut.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFitment:\u003c\/li\u003e\n\u003cli\u003eDesigned to fit 3rd Gen Tacoma 2016-2023\u003c\/li\u003e\n\u003cli\u003eFender Trim Templates Included for Perfect Fender Cut\u003c\/li\u003e\n\u003cli\u003eFeatures:\u003c\/li\u003e\n\u003cli\u003eAluminum Construction\u003c\/li\u003e\n\u003cli\u003eProvides Maximum Clearance While Covering Air Intake and Door Jams\u003c\/li\u003e\n\u003cli\u003eEdge Trim Provides a Tight Seal Against Dust \u0026amp; Debris\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2016-2023 Toyota Tacoma\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e C4 Fabrication\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1200-8416-FL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Raw - Unfinished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 15 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 10 x 10 x 36 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/youtu.be\/hDMz3FO1t9I\" target=\"_blank\" rel=\"noopener\"\u003eInstallation video\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eC4 Fabrication covers this product with a 2-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized C4 Fabrication dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":50528019742885,"sku":"1200-8416-FL","price":549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/3rdGenTacomaHighClearanceFenderLinersCover.jpg?v=1790309870"},{"product_id":"c4-fab-2016-2023-toyota-tacoma-oversized-tire-fitment-kit-3rd-gen","title":"C4 Fabrication 2016-2023 Toyota Tacoma Oversized Tire Fitment Kit 3rd Gen, 1200-8416-OTF","description":"\u003cp\u003eThe C4 Fabrication Tacoma Oversized Tire Fitment Kit 3rd Gen is made from steel and built for 2016-2023 Toyota Tacoma. Part number 1200-8416-OTF.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eUpgrade your Tacoma with these bolt-in aluminum high clearance fender liners, engineered for 2016–2023 3rd Gen models. Designed to maximize tire clearance without compromising protection, these liners shield your air intake and door jambs while sealing tightly against the fender with included edge trim. Minor drilling required. Comes with fender trim templates for a precise, clean cut.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFitment:\u003c\/li\u003e\n\u003cli\u003eDesigned to fit 3rd Gen Tacoma 2016-2023\u003c\/li\u003e\n\u003cli\u003eFender Trim Templates Included for Perfect Fender Cut\u003c\/li\u003e\n\u003cli\u003eFeatures:\u003c\/li\u003e\n\u003cli\u003eAluminum Construction\u003c\/li\u003e\n\u003cli\u003eProvides Maximum Clearance While Covering Air Intake and Door Jams\u003c\/li\u003e\n\u003cli\u003eEdge Trim Provides a Tight Seal Against Dust \u0026amp; Debris\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2016-2023 Toyota Tacoma\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e C4 Fabrication\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 1200-8416-OTF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Raw - Unfinished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/youtu.be\/79mpoTeIL6Y?list=PLlD75V0_Arb6TQ2bahXjHsVpmdttmWqHZ\" target=\"_blank\" rel=\"noopener\"\u003eInstallation video\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eC4 Fabrication covers this product with a 2-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized C4 Fabrication dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":50528019873957,"sku":"1200-8416-OTF","price":748.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/3rdGenTacomaOTFCover.jpg?v=1790309872"},{"product_id":"dv8-2018-2026-jeep-wrangler-jl-rear-inner-fenders-infend-06rb","title":"DV8 Offroad 2018-2026 Jeep Wrangler JL Rear Inner Fenders, INFEND-06RB","description":"\u003cp\u003eThe DV8 Offroad Wrangler JL Rear Inner Fenders is made from aluminum and built for 2018-2026 Jeep Wrangler. Part number INFEND-06RB.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eDV8’s Rear Inner Fenders help protect your vehicle’s rear exposed components. The raw aluminum accent panel is paintable for a custom look. Our inner fenders are made from aluminum, and are finished in a micro-texture black powder coat. They are fully bolt-on, and match our JL\/JT Front Inner Fenders.\u003c\/p\u003e\u003cp\u003e* Please Note: Tire fitment is dependent on lift size.\u003c\/p\u003e\u003cp\u003e** Please Note: Fitment is not confirmed for the Eco Diesel or 392 models.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eProtects Vital Rear Components\u003c\/li\u003e\n\u003cli\u003eCleans Up Wheel Well\u003c\/li\u003e\n\u003cli\u003ePaintable Mesh Panels\u003c\/li\u003e\n\u003cli\u003eFully Bolt-On Installation\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003e1.5mm Lightweight Aluminum Construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2018-2026 Jeep Wrangler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JL, JLU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCab \/ roof:\u003c\/strong\u003e 2-Door, 4-Door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Fitment is not confirmed for the Eco Diesel or 392 models.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e INFEND-06RB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 3 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 2 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 19 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 10 x 22 x 43 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/MPJL-09_Installation_Guide_Final.pdf?v=3528021218349880723\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528031768741,"sku":"INFEND-06RB","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/2018-2024-Jeep-Wrangler-JL-Rear-Inner-Fenders-1.jpg?v=1790309945"},{"product_id":"dv8-2020-2026-jeep-gladiator-jt-rear-inner-fenders-infend-07rb","title":"DV8 Offroad 2020-2026 Jeep Gladiator JT Rear Inner Fenders, INFEND-07RB","description":"\u003cp\u003eThe DV8 Offroad Gladiator JT Rear Inner Fenders is made from aluminum and built for 2020-2026 Jeep Gladiator, Wrangler. Part number INFEND-07RB.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eOur Rear Inner Fender Liners offer a trim and sleek look to the rear of your rig while shielding vital components like the vacuum and fuel lines from rocks and debris. Their aluminum construction offers a durable design without unnecessary added weight. The fenders are finished in a resilient satin black powder coat and feature a laser-cut logo where the factory vehicle color shines through. Pair these rear inner fenders with our front inner fenders for a polished look and full off-road protection. For a quick and easy installation process, the inner fenders are fully bolt-on with no cutting required.\u003c\/p\u003e\u003cp\u003e* Please Note: Tire fitment is dependent on the lift height of your vehicle.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eProtects Vital Components Near the Rear Inner Fender Compartments\u003c\/li\u003e\n\u003cli\u003eLaser-Cut Logo\u003c\/li\u003e\n\u003cli\u003eBolt-On Installation\u003c\/li\u003e\n\u003cli\u003e1.5mm Lightweight Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eSatin Black Powder Coat Finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2020-2026 Jeep Wrangler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCab \/ roof:\u003c\/strong\u003e 4-Door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed length:\u003c\/strong\u003e 60\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Bolt-on\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e INFEND-07RB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 3 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 2 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 23 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 12 x 22 x 54 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/FBTT1-07_Installation_Guide_Final.pdf?v=13034451445640354491\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528044351653,"sku":"INFEND-07RB","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/Jeep-Gladiator-JT-Rear-Inner-Fenders-1.jpg?v=1790310104"},{"product_id":"dv8-2018-2025-jeep-wrangler-jl-gladiator-jt-front-inner-fenders-infend-06fb","title":"DV8 Offroad 2018-2025 Jeep Wrangler JL \u0026 Gladiator JT Front Inner Fenders, INFEND-06FB","description":"\u003cp\u003eThe DV8 Offroad Wrangler JL \u0026amp; Gladiator JT Front Inner Fenders is made from aluminum and built for 2018-2025 Jeep Gladiator, Wrangler. Part number INFEND-06FB.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eIf your rig is equipped with aftermarket fenders, protect your exposed engine compartment from rocks and debris when off-road with our Front Inner Fenders. For proper airflow, the inner fenders feature mesh panels which are made from lightweight aluminum to avoid adding unnecessary weight to your jeep. The panels are paintable so you can customize them to match or accent your rig’s styling. Installation is simple thanks to its fully bolt-on design, and they are compatible with or without the passenger side factory crash bar on 2023+ models. The inner fenders, aside from the paintable accent panels, are finished in a satin black powder coat finish for a sleek look.\u003c\/p\u003e\u003cp\u003e* Please Note: Tire fitment is dependent on your Jeep’s lift size.\u003c\/p\u003e\u003cp\u003e** Please Note: Our inner fenders have been tested on the 2024 Jeep Wrangler Rubicon X with 35-inch All Terrain tires and aftermarket wheels. We experienced no rubbing on moderate trails with this setup.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLightweight Aluminum\u003c\/li\u003e\n\u003cli\u003eMesh Panels for Improved Airflow\u003c\/li\u003e\n\u003cli\u003eBolt-On Installation\u003c\/li\u003e\n\u003cli\u003eSatin Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003ePaintable Accent\/Mesh Panels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2018-2025 Jeep Wrangler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JL, JLU, JT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCab \/ roof:\u003c\/strong\u003e 2-Door, 4-Door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed length:\u003c\/strong\u003e 60\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Bolt-on, Works with or without factory crash bar (passenegr side, 23+ models)\u003cbr\u003eThese have been tested on 2024 Jeep Wrangler Rubicon X with 35-inch All Terrain tires and aftermarket wheels. We experienced no rubbing on moderate trails with this setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e INFEND-06FB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 3 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 2.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 19 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 11 x 24 x 28 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/SPTT1-04_Install_Guide_Final.pdf?v=13656173412318341436\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528044712101,"sku":"INFEND-06FB","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/2018-2024-Jeep-Wrangler-JL-_-Gladiator-JT-Front-Inner-Fenders-Set-2.jpg?v=1790310108"},{"product_id":"dv8-2007-2018-jeep-wrangler-jk-armor-fender-flares-front-rear-fdjk-09","title":"DV8 Offroad 2007-2018 Jeep Wrangler JK Armor Fender Flares Front \u0026 Rear, FDJK-09","description":"\u003cp\u003eThe DV8 Offroad Wrangler JK Armor Fender Flares Front \u0026amp; Rear is made from steel and built for 2007-2018 Jeep Wrangler. Part number FDJK-09.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eOur Armor Fenders feature a slim design and an aggressive look that complements your rig’s factory styling. The full steel structure offers improved protection from rocks, shrubs, and other debris when venturing off-road. The included rubber seal helps to protect your rig from dust and rock buildup where the fenders meet the body panels. Their slim width allows you to fit through tighter spaces on the trail. The fenders provide additional clearance over stock fenders for improved articulation. Integrated in the fender flares are plug and play amber marker lights, increasing visibility of your rig to others in dark or dusty conditions. We included paintable aluminum accent panels which can be painted to match the body or other accessories. The fenders are finished in a resilient micro-texture black powder coat.\u003c\/p\u003e\u003cp\u003e*Please Note: Cutting of the support brackets at the front fenders is required for installation. We recommend painting the bit of exposed steel to prevent rust at the cut point.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSlim-Width Design\u003c\/li\u003e\n\u003cli\u003eImproved Clearance for Articulation\u003c\/li\u003e\n\u003cli\u003eProtective Rubber Seals\u003c\/li\u003e\n\u003cli\u003ePlug and Play Amber Marker Lights\u003c\/li\u003e\n\u003cli\u003ePaintable Aluminum Accent Panels\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003e2.5 \u0026amp; 3mm Steel Construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2007-2018 Jeep Wrangler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JK\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e FDJK-09\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 4 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 3.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 98 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 17 x 31 x 56 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/SPTT1-03_Installation_Guide_Final.pdf?v=3859201148085449480\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528046809253,"sku":"FDJK-09","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/Jeep-Wrangler-JK-Armor-Fender-Flares-4.jpg?v=1790310134"},{"product_id":"dv8-2020-2026-jeep-gladiator-jt-fender-deletes-fdgl-08","title":"DV8 Offroad 2020-2026 Jeep Gladiator JT Fender Deletes, FDGL-08","description":"\u003cp\u003eThe DV8 Offroad Gladiator JT Fender Deletes is made from steel and built for 2020-2026 Jeep Gladiator. Part number FDGL-08.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eOur Fender Deletes provide clearance for maximum articulation. The hardware is designed to sit flush with the deletes to minimize space, while the overall slim design offers the best clearance possible. Constructed out of 3.5mm plate steel and finished with a micro-texture black powder coat, our deletes are made to provide extra protection from the elements. Retain full utility with the included plug and play amber turn signal lights. Installation is straightforward with minimal trimming required.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDesigned to Optimize Articulation when Rock Crawling\u003c\/li\u003e\n\u003cli\u003eFeatures Plug and Play Amber Turn Signals\u003c\/li\u003e\n\u003cli\u003eConstructed out of 3.5mm Plate Steel\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eBolt-On Installation with No Drilling Required\u003c\/li\u003e\n\u003cli\u003eAll Mounting Hardware Included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2020-2026 Jeep Gladiator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCab \/ roof:\u003c\/strong\u003e 4-Door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed length:\u003c\/strong\u003e 60\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Direct Fit\/Bolt-On. Does not work with OEM inner fenders. Minor cutting required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e FDGL-08\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 3 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 2.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 42 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 4 x 23 x 56 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/MPBR-07_Install_Final.pdf?v=12538043106931768274\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528051495077,"sku":"FDGL-08","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/Jeep-Gladiator-JT-Fender-Deletes-Offtruck-Main.jpg?v=1790310175"},{"product_id":"dv8-2018-2026-jeep-wrangler-jl-fender-deletes-fdjl-08","title":"DV8 Offroad 2018-2026 Jeep Wrangler JL Fender Deletes, FDJL-08","description":"\u003cp\u003eThe DV8 Offroad Wrangler JL Fender Deletes is made from steel and built for 2018-2026 Jeep Wrangler. Part number FDJL-08.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eOur Fender Deletes optimize your tire clearance when navigating obstacles. The full steel composition and powder coat finish provides added durability. Our deletes offer a sleek look that complement your Jeep’s styling. Installation is straightforward with minimal trimming required. Included are plug and play amber turn signals. Our flush hardware ensures that the fender deletes remain low profile.\u003c\/p\u003e\u003cp\u003e*Please Note: Not Compatible with Factory Inner Fenders.\u003c\/p\u003e\u003cp\u003e**Please Note: The factory support brackets for the OEM fender must be cut off to install the fender deletes. Then the exposed steel on the vehicle body must be color-matched or painted black to prevent rust.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eProvides Maximum Articulation for Rock Crawling\u003c\/li\u003e\n\u003cli\u003eIncluded Plug and Play Amber Turn Signals\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e3.5mm Plate Steel Construction\u003c\/li\u003e\n\u003cli\u003eBolt-On Install\u003c\/li\u003e\n\u003cli\u003eMinor Cutting Required\u003c\/li\u003e\n\u003cli\u003eAll Mounting Hardware Included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2018-2026 Jeep Wrangler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JL, JLU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCab \/ roof:\u003c\/strong\u003e 2-Door, 4-Door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Direct Fit\/Bolt-On. Does not work with OEM inner fenders. Minor cutting required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e FDJL-08\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 3 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 2.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 40 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 4 x 23 x 50 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/FBFR-01_Install_Guide_Final.pdf?v=7985255945467945863\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528051593381,"sku":"FDJL-08","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/Jeep-Wrangler-JL-Fender-Deletes-Offtruck-08.jpg?v=1790310176"},{"product_id":"dv8-2007-2018-jeep-wrangler-jk-spec-series-fender-flares-fdjk-06","title":"DV8 Offroad 2007-2018 Jeep Wrangler JK Spec Series Fender Flares, FDJK-06","description":"\u003cp\u003eThe DV8 Offroad Wrangler JK Spec Series Fender Flares is made from steel and built for 2007-2018 Jeep Wrangler. Part number FDJK-06.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eOur Spec Series Fender Flares feature a tube and plate steel construction that offer both protection and style. Their low profile fitment increases clearance to enable improved axle articulation on the trail. The seam along the edge of the fender and the body is protected by a rubber seal, which also helps prevent the build-up of dust or small rocks.\u003c\/p\u003e\u003cp\u003eThese fenders are finished in a micro-texture black powder coat to protect against damage from weather. Included with the fender kit are plug \u0026amp; play front amber marker lights. Installation of the Spec Series Fenders is a direct fit bolt-on process that requires no drilling or cutting. As an option for the cleanest look, the factory support bracket for the OEM fenders can be trimmed off. If removed, the exposed metal must be painted with color-matched or black paint to prevent rust. We detail this optional step in our installation manual.\u003c\/p\u003e\u003cp\u003e* Please Note: These are not compatible with factory inner fender liners.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTube \u0026amp; Plate Design Offers Protection with Style\u003c\/li\u003e\n\u003cli\u003eIncludes Rubber Seal to Protect Body Edge \u0026amp; Prevent Dust\/Rock Buildup\u003c\/li\u003e\n\u003cli\u003eOffers Additional Clearance for Better Articulation\u003c\/li\u003e\n\u003cli\u003eSlim but Effective Profile\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eBolt-On Direct Fit Installation\u003c\/li\u003e\n\u003cli\u003ePlug and Play Amber Side Marker Light Included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2007-2018 Jeep Wrangler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JK, JKU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCab \/ roof:\u003c\/strong\u003e 2-Door, 4-Door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Direct Fit\/Bolt-On. Does not work with OEM inner fenders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e FDJK-06\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 3 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 2.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 69 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 13 x 27 x 52 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/FBDR1-06__Install__Guide_March_24.pdf?v=4040107030732241731\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528053821605,"sku":"FDJK-06","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/2007-2018-Jeep-Wrangler-JK-Spec-Series-Fender-Flares-Offtruck-08.jpg?v=1790310205"},{"product_id":"dv8-2007-2018-jeep-wrangler-jk-fender-flare-deletes-fdjk-08","title":"DV8 Offroad 2007-2018 Jeep Wrangler JK Fender Flare Deletes, FDJK-08","description":"\u003cp\u003eThe DV8 Offroad Wrangler JK Fender Flare Deletes is made from steel and built for 2007-2018 Jeep Wrangler. Part number FDJK-08.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThese Fender Deletes were designed to provide maximum clearance for articulation for aggressive off-road driving. The steel plating is contoured to flow with the body’s aesthetic to complement the factory styling with a more aggressive look. The steel is finished in a micro-texture black powder coat to protect them against the elements. Included with the fender delete kit are plug \u0026amp; play front amber marker lights. As an option for the cleanest look, the factory support bracket for the OEM fenders can be trimmed off. If removed, the exposed metal must be painted with color-matched or black paint to prevent rust. We detail this optional step in our installation manual.\u003c\/p\u003e\u003cp\u003e** Please Note: These are not compatible with the OEM inner fenders.\u003c\/p\u003e\u003cp\u003e** Please Note: Minor cutting is required for installation.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOffers Maximum Clearance over OEM Fenders for Articulation\u003c\/li\u003e\n\u003cli\u003eFull Steel Structure for Extra Protection While Off-Road\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003ePlug and Play Amber Side Marker Light Included\u003c\/li\u003e\n\u003cli\u003eMinor Cutting Required for Install\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2007-2018 Jeep Wrangler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JK, JKU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCab \/ roof:\u003c\/strong\u003e 2-Door, 4-Door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Direct Fit\/Bolt-On. Does not work with OEM inner fenders. Minor cutting required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e FDJK-08\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 3 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 2.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 37 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 5 x 22 x 48 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/FBDR1-06SP_install_guide_March_24.pdf?v=4163262840863528910\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528053985445,"sku":"FDJK-08","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/Jeep-Wrangler-JK-Fender-Flare-Deletes-Offtruck-08.jpg?v=1790310207"},{"product_id":"rago-2024-2026-toyota-tacoma-bed-channel-stiffeners-ac6702501na","title":"Rago Fabrication 2024-2026 Toyota Tacoma Bed Channel Stiffeners, AC6702501NA","description":"\u003cp\u003eThe Rago Fabrication Tacoma Bed Channel Stiffeners is made from steel and built for 2024-2026 Toyota Tacoma. Part number AC6702501NA.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eOur 4th Gen Tacoma Bed Channel Stiffeners solve the problem of the rear composite bed channels from cracking due to stresses from camper shells, racks, \u0026amp; off-roading. They reinforce these channels with a 3\/16-inch stiffener and a 3\/16-inch backing plate, providing an additional ⅛-inch of steel for superior rigidity.\u003c\/p\u003e\u003cp\u003eThe top of the brackets feature accessory mounting locations perfect for a whip flag, light pod, or antenna. The stiffeners are made from American steel and finished in a durable 2-stage hammer black powder coat. These robust brackets ensure maximum strength and longevity, allowing you to confidently tackle any adventure.\u003c\/p\u003e\u003cp\u003e* Please Note: Some drilling is required for installation. During installation it's important to use a Step Bit (Unibit) to prevent cracking, rather than a regular Drill Bit.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReinforces Vulnerable Truck Bed Channels\u003c\/li\u003e\n\u003cli\u003eSold as Pair | Driver and Passenger Side\u003c\/li\u003e\n\u003cli\u003eAccessory Mount on Top\u003c\/li\u003e\n\u003cli\u003eSome Drilling is Required for Install\u003c\/li\u003e\n\u003cli\u003eHigh Quality American Steel\u003c\/li\u003e\n\u003cli\u003e2-Stage Hammer Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2024-2026 Toyota Tacoma\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim:\u003c\/strong\u003e TRD\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rago Fabrication\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e AC6702501NA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hammer Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 2 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 0.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 11 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 4 x 20 x 10 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_InstallGuide_AC6702501NA.pdf?v=5199065575091749455\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eRago Fabrication covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized Rago Fabrication dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50528055394469,"sku":"AC6702501NA","price":144.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/2024-Toyota-Tacoma-Bed-Channel-Stiffeners_Offtruck_1.jpg?v=1790310221"},{"product_id":"rago-2007-2021-toyota-tundra-pair-bed-channel-stiffeners-r0700ttunbed","title":"Rago Fabrication 2007-2021 Toyota Tundra Pair of Bed Channel Stiffeners, R0700TTUNBED","description":"\u003cp\u003eThe Rago Fabrication Tundra Pair of Bed Channel Stiffeners is made from steel and built for 2007-2021 Toyota Tundra. Part number R0700TTUNBED.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThe Rago Fabrication Toyota Tundra Bed Channel Stiffeners solve a known problem that Tundra's acquire over time. If you have a camper shell, bed rack, or use your Tundra to off-road frequently, the rear sheet metal channels are known to crack overtime because of added stress and weight to the vehicle.\u003c\/p\u003e\u003cp\u003eRago Fabrication designed Bed Channel Stiffeners out 3\/16\" Steel for extreme strength and durability. Our brackets mount on the bottom existing bolt holes and to the side of the bed with 3 - 1\/2\" bolts which requires drilling. The brackets will come powder coated black for durability. The installation is easily completed within a half an hour.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eMade from 3\/16\" Steel\u003c\/li\u003e\n\u003cli\u003ePowder coated Textured Black\u003c\/li\u003e\n\u003cli\u003eSome Drilling is Required\u003c\/li\u003e\n\u003cli\u003eSold as pair- left and right side\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2007-2021 Toyota Tundra\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rago Fabrication\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e R0700TTUNBED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hammer Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 2 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 0.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 12 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 6 x 18 x 14 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/youtu.be\/glPAW6C6JHQ\" target=\"_blank\" rel=\"noopener\"\u003eInstallation video\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eRago Fabrication covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized Rago Fabrication dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50528058114213,"sku":"R0700TTUNBED","price":122.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/R0700TTUNBED_Offtruck_1.jpg?v=1790310240"},{"product_id":"add-2019-2026-chevy-gmc-1500-2500-bed-channel-stiffeners-ac1402501na","title":"Addictive Desert Designs 2019-2026 Chevy\/GMC 1500\/2500 Bed Channel Stiffeners, AC1402501NA","description":"\u003cp\u003eThe Addictive Desert Designs Chevy\/GMC 1500\/2500 Bed Channel Stiffeners is made from steel and built for 2019-2026 Chevrolet \/ GMC Sierra, Silverado. Part number AC1402501NA.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eOur 2019+ GMC\/Chevy 1500 Bed Channel Stiffeners reinforce the weak truck bed channels against cracking and other damage. Heavy loads, camper shells, bed racks, or off-road stresses can crack the bed channels over time. These brackets provide the needed extra support and rigidity to avoid this common problem. Our brackets add an extra 3\/8-inches of steel, composed of a 3\/16-inch stiffener and a 3\/16-inch backer plate.\u003c\/p\u003e\u003cp\u003eEach bracket features accessory mounting locations that are perfectly suited for antennas or flag mounting. Additional tie down points are also included in the design. Our stiffeners are finished in a durable hammer black powder coat, and as always, are Made in America.\u003c\/p\u003e\u003cp\u003e* Please Note: This is not compatible with the Carbon Pro Bed.\u003c\/p\u003e\u003cp\u003e** Please Note: Installation requires drilling and riv nuts.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReinforces Weak Bed Channels against Cracking\u003c\/li\u003e\n\u003cli\u003eFits All Bed Lengths\u003c\/li\u003e\n\u003cli\u003eMounting Provisions for Antenna and\/or Flag\u003c\/li\u003e\n\u003cli\u003eOffers Additional Tie Down Points\u003c\/li\u003e\n\u003cli\u003eDurable 2-Stage Hammer Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2019-2026 Chevrolet \/ GMC Silverado 1500, Silverado 2500, Sierra 1500, Sierra 2500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Fits All Bed Lengths\u003cbr\u003eDirect Fitment Using Supplied Hardware For Easy Installation\u003cbr\u003eRequires Drilling And Riv Nuts For Installation\u003cbr\u003eIs NOT Compatible With The Carbon Pro Bed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Addictive Desert Designs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e AC1402501NA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hammer Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 2 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 1 hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 9 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 8 x 14 x 24 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/2019-23-GMC_Chevy-1500-BedStiffeners-InstallGuide.pdf?v=1484256822249426187\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eAddictive Desert Designs covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized Addictive Desert Designs dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":50528063291557,"sku":"AC1402501NA","price":248.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/2019-2024-Chevy-GMC-1500-Bed-Channel-Stiffeners-Installed-01.jpg?v=1790310300"},{"product_id":"add-2021-2026-ford-bronco-bronco-raptor-frame-horn-gusset-kit-ac2303701na","title":"Addictive Desert Designs 2021-2026 Ford Bronco \u0026 Bronco Raptor Frame Horn Gusset Kit, AC2303701NA","description":"\u003cp\u003eThe Addictive Desert Designs Bronco \u0026amp; Bronco Raptor Frame Horn Gusset Kit is made from steel and built for 2021-2026 Ford Bronco. Part number AC2303701NA.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eOur Frame Horn Gusset Kit was engineered to reinforce the Bronco \u0026amp; Bronco Raptor’s failure prone OEM frame horn mounts. 6th gen Broncos have been known to take damage to the frame horn when using a winch or tow hooks during recovery scenarios. This kit installs to the frame horn using heavy duty grade 8 hardware. This enables you to run your stock or aftermarket front bumper’s winch and other recovery points with confidence. The heavy duty 1018 steel is finished in a dual-stage hammer black powder coat, and features a fully bolt-on installation. As always, this is Made in America.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReinforces the Failure Prone OEM Frame Horn Mounts\u003c\/li\u003e\n\u003cli\u003eIntended for Use with Winch Capable or Recovery Point Integrated Bumpers\u003c\/li\u003e\n\u003cli\u003eIncludes Heavy Duty Grade 8 Hardware\u003c\/li\u003e\n\u003cli\u003eHammer Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eFully Bolt-On Installation\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2021-2026 Ford Bronco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e Raptor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim:\u003c\/strong\u003e Raptor, Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Bolt-On, Direct-Fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Addictive Desert Designs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e AC2303701NA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hammer Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 2 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 1 hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 6 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 4 x 6 x 8 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/2021-Bronco-FrameHornGussets-InstallGuide.pdf?v=15452087573108891892\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eAddictive Desert Designs covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized Addictive Desert Designs dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":50528068501669,"sku":"AC2303701NA","price":158.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/2021-2023-Ford-Bronco-_-Bronco-Raptor-Frame-Horn-Gusset-Kit-Installed-03.jpg?v=1790310372"},{"product_id":"dv8-2022-2026-toyota-tundra-sequoia-inner-fender-liners-inft2-01","title":"DV8 Offroad 2022-2026 Toyota Tundra \u0026 Sequoia Inner Fender Liners, INFT2-01","description":"\u003cp\u003eThe DV8 Offroad Tundra \u0026amp; Sequoia Inner Fender Liners is made from aluminum and built for 2022-2026 Toyota Sequoia, Tundra. Part number INFT2-01.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eOur Inner Fenders were designed to replace the plastic\/rubber factory fender liners. They not only help protect the engine compartment from dirt, mud, \u0026amp; other debris; but also add unique styling to the wheel wells of your truck. Constructed from lightweight aluminum, the panels are finished in a dual stage micro-texture black powder coat. Installation is quick and easy, with no cutting or drilling required.\u003c\/p\u003e\u003cp\u003e* Please Note: Front Inner Fenders may not be compatible with some aftermarket suspension systems that use shock reservoirs.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces Cheap Plastic\/Rubber Factory Inner Fenders\u003c\/li\u003e\n\u003cli\u003eProtects the Engine Compartment from Dirt \u0026amp; Debris\u003c\/li\u003e\n\u003cli\u003eAdds Unique Styling to the Tundra Wheel Wells\u003c\/li\u003e\n\u003cli\u003eLightweight Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eQuick and Easy Installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2022-2026 Toyota Tundra, Sequioa\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Front fender piece may not be compatible with some aftermarket suspension systems that use shock reservoirs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e INFT2-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 2 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 1 hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 5 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 8 x 15 x 15 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/LPBM-02_installation__Guide_Final.pdf?v=12176494852902061866\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528069025957,"sku":"INFT2-01","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/2022-2023-Toyota-Tundra-Inner-Fender-Liners-Offtruck-07.jpg?v=1790310380"},{"product_id":"add-2021-2026-ford-f-150-raptor-bed-channel-stiffeners-ac1902501na","title":"Addictive Desert Designs 2021-2026 Ford F-150 \u0026 Raptor Bed Channel Stiffeners, AC1902501NA","description":"\u003cp\u003eThe Addictive Desert Designs F-150 \u0026amp; Raptor Bed Channel Stiffeners is made from steel and built for 2021-2026 Ford F-150. Part number AC1902501NA.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eOur 2021+ F-150 \u0026amp; Raptor Bed Channel Stiffeners fix a common problem faced by truck owners. The bed channels of pickup trucks are susceptible to cracking and damage over time, especially when subjected to heavy payloads, fifth-wheel mounts, overland bed racks, camper shells, or off-roading stresses. The brackets provide rigidity to help minimize the sheet metal of the truck bed from extreme torque. Our brackets add an extra 3\/8-inches of steel, composed of a 3\/16-inch stiffener and a 3\/16-inch backer plate.\u003c\/p\u003e\u003cp\u003eAt the top of each bracket are accessory mounting locations suitable for accessories like a whip flag or antenna mount. Keep your F-150 going strong for years to come with our heavy-duty bed channel stiffeners. As always, these are Made in America.\u003c\/p\u003e\u003cp\u003e* Please Note: Some drilling is required for installation.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReinforces Truck Bed\u003c\/li\u003e\n\u003cli\u003eSold as Pair | Driver and Passenger Side\u003c\/li\u003e\n\u003cli\u003eAccessory Mount Provisions on Top of Bracket (Antenna, Whip Flag, etc.)\u003c\/li\u003e\n\u003cli\u003eSome Drilling is Required\u003c\/li\u003e\n\u003cli\u003eHigh Quality American Steel\u003c\/li\u003e\n\u003cli\u003eDurable 2-Stage Hammer Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2021-2026 Ford F-150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e Raptor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim:\u003c\/strong\u003e Raptor, Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed length:\u003c\/strong\u003e 66\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Bolt-On, Direct-Fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Addictive Desert Designs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e AC1902501NA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hammer Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 2 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 1 hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 6 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 8 x 14 x 18 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/23-Ford-F150-BedStiffeners-InstallGuide.pdf?v=14354456370543206396\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eAddictive Desert Designs covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized Addictive Desert Designs dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":50528069320869,"sku":"AC1902501NA","price":219.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/2021-2023-Ford-F-150-_-Raptor-Bed-Channel-Stiffeners_Studio-01.jpg?v=1790310384"},{"product_id":"add-2015-2020-ford-f-150-raptor-bed-channel-stiffeners-ac1102501na","title":"Addictive Desert Designs 2015-2020 Ford F-150 \u0026 Raptor Bed Channel Stiffeners, AC1102501NA","description":"\u003cp\u003eThe Addictive Desert Designs F-150 \u0026amp; Raptor Bed Channel Stiffeners is made from steel and built for 2015-2020 Ford F-150. Part number AC1102501NA.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eOur Bed Channel Stiffeners provide a solution to a common problem faced by truck owners. The sheet metal bed channels of pickup trucks are prone to cracking and fatigue damage over time, especially when subjected to heavy payloads or off-roading stresses. The tops of the brackets feature slotted holes suitable for accessory mounting. These brackets are purposefully designed to fortify your truck bed, ensuring unparalleled durability and peace of mind. As always, these are Made in America. ** Please Note: Some drilling is required for installation.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReinforces Truck Bed\u003c\/li\u003e\n\u003cli\u003eSold as Pair | Driver and Passenger Side\u003c\/li\u003e\n\u003cli\u003eAccessory Mount Provisions on Top of Bracket\u003c\/li\u003e\n\u003cli\u003eSome Drilling is Required\u003c\/li\u003e\n\u003cli\u003eHigh Quality American Steel\u003c\/li\u003e\n\u003cli\u003eHammer Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2015-2020 Ford F-150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e Raptor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim:\u003c\/strong\u003e Raptor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Drilling Required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Addictive Desert Designs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e AC1102501NA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hammer Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 2 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 1 hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 6 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 6 x 14 x 18 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/17-20-Ford-Raptor-BedStiffeners-InstallGuide.pdf?v=8835873188222519868\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eAddictive Desert Designs covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized Addictive Desert Designs dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":50528070762661,"sku":"AC1102501NA","price":198.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/17Raptor_BedChannelStiffeners-Product.jpg?v=1790310404"},{"product_id":"add-2023-2026-ford-super-duty-bed-channel-stiffeners-ac8103401na","title":"Addictive Desert Designs 2023-2026 Ford Super Duty Bed Channel Stiffeners, AC8103401NA","description":"\u003cp\u003eThe Addictive Desert Designs Super Duty Bed Channel Stiffeners is made from steel and built for 2023-2026 Ford Super Duty. Part number AC8103401NA.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eHeavy loads can cause rear bed channels to crack over time. Our Super Duty bed channel stiffeners, made from ⅛-inch American steel, reinforce them to prevent damage. They're finished in black powder coat, install with factory hardware and existing holes, and are proudly Made in America.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReinforces Bed For Heavy Loads \u0026amp; Towing\u003c\/li\u003e\n\u003cli\u003eDirect Fit Bolt-On Installation\u003c\/li\u003e\n\u003cli\u003eNo Drilling Required\u003c\/li\u003e\n\u003cli\u003eUtilizes Factory Hardware\u003c\/li\u003e\n\u003cli\u003eHammer Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eAmerican Steel\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2023-2026 Ford F-250, F-350, F-450\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed length:\u003c\/strong\u003e 81.6\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Bolt-On, Direct-Fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Addictive Desert Designs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e AC8103401NA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hammer Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 2 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 1 hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 13 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 8 x 14 x 18 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/2023-Ford-SuperDuty-BedStiffeners-InstallGuide.pdf?v=17892596674941206432\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eAddictive Desert Designs covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized Addictive Desert Designs dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":50528073384101,"sku":"AC8103401NA","price":248.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/2023-Ford-F-250-350-Super-Duty-Bed-Channel-Stiffener_Installed_01.jpg?v=1790310421"},{"product_id":"dv8-2007-2018-jeep-wrangler-jk-slim-fender-flares-fdjk-07","title":"DV8 Offroad 2007-2018 Jeep Wrangler JK Slim Fender Flares, FDJK-07","description":"\u003cp\u003eThe DV8 Offroad Wrangler JK Slim Fender Flares is made from steel and built for 2007-2018 Jeep Wrangler. Part number FDJK-07.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eOur Slim Fender Flares for the Jeep Wrangler JK were designed for a sleek and aggressive off-road style. Their slim width enables you to fit in tighter spaces on the trail. Their full steel structure provides extra protection and their slim profile offers improved articulation when off-road. The fenders include a rubber seal to protect the body panels and prevent the buildup of dust or small pebbles. The front fenders feature a plug and play amber turn signal. A micro-texture black powder coat protects the fenders from the elements. Installation is fully bolt-on, but there is an optional cut \u0026amp; paint that can be done for the cleanest look.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSlim width to fit through tighter spaces on the trail.\u003c\/li\u003e\n\u003cli\u003eIncludes rubber seal to protect the vehicle and prevent rock\/dust buildup.\u003c\/li\u003e\n\u003cli\u003eOffers additional clearance for articulation offroad.\u003c\/li\u003e\n\u003cli\u003eFull steel structure for extra protection while offroad.\u003c\/li\u003e\n\u003cli\u003eSlim fender design for a sleek and aggressive look.\u003c\/li\u003e\n\u003cli\u003eDirect fit for a bolt-on installation.\u003c\/li\u003e\n\u003cli\u003ePlug and play amber side marker light included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFront Rear\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFront: 7\" Front: 3.5\"\u003c\/li\u003e\n\u003cli\u003eMiddle: 6\" Middle: 4.25\"\u003c\/li\u003e\n\u003cli\u003eRear: 3.5\" Rear: 4\"\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2007-2018 Jeep Wrangler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JK, JKU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCab \/ roof:\u003c\/strong\u003e 2-Door, 4-Door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Direct Fit\/Bolt-On. Does not work with OEM inner fenders. Cutting optional.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e FDJK-07\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 3 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 2.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 63 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 10 x 28 x 49 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/SRJL-29_Install_Guide.pdf?v=13603178571337302511\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528073711781,"sku":"FDJK-07","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/2007-2018-Jeep-Wrangler-JK-Slim-Fender-Flares_Offtruck-02.jpg?v=1790310425"},{"product_id":"dv8-2020-2026-jeep-gladiator-jt-slim-fender-flares-fdgl-07","title":"DV8 Offroad 2020-2026 Jeep Gladiator JT Slim Fender Flares, FDGL-07","description":"\u003cp\u003eThe DV8 Offroad Gladiator JT Slim Fender Flares is made from steel and built for 2020-2026 Jeep Gladiator. Part number FDGL-07.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eOur Slim Fender Flares for the Jeep Gladiator were designed for a sleek and aggressive off-road style. Their slim width enables you to fit in tighter spaces on the trail. Their full steel structure provides extra protection and their slim profile offers improved articulation when off-road. The fenders include a rubber seal to protect the body panels and prevent the buildup of dust or small pebbles. The front fenders include dual stage daytime white running lights that function as amber turn signals. A micro-texture black powder coat protects the fenders from the elements. Installation is fully bolt-on, but there is an optional cut \u0026amp; paint that can be done for the cleanest look.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSlim Width to Fit through Tighter Spaces on the Trail\u003c\/li\u003e\n\u003cli\u003e\"Plug and play\" dual stage day time running light (white)\/ turn signal (amber).\u003c\/li\u003e\n\u003cli\u003eIncludes rubber seal to protect the vehicle and prevent rock\/dust buildup.\u003c\/li\u003e\n\u003cli\u003eOffers additional clearance for articulation offroad.\u003c\/li\u003e\n\u003cli\u003eFull steel structure for extra protection while offroad.\u003c\/li\u003e\n\u003cli\u003eSlim fender design for a sleek and aggressive look.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFront Rear\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFront: 6.75\" Front: 3\"\u003c\/li\u003e\n\u003cli\u003eMiddle: 6.25\" Middle: 4.5\"\u003c\/li\u003e\n\u003cli\u003eRear: 3.5\" Rear: 3\"\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2020-2026 Jeep Gladiator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCab \/ roof:\u003c\/strong\u003e 4-Door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed length:\u003c\/strong\u003e 60\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Cutting highly recommended----Color-matched\/black paint for the bare steel highly recommended.\u003cbr\u003eWill not work with OEM inner fender.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e FDGL-07\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 3 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 2.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 65 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 28 x 10 x 54 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/SRGL-08_Install_Guide.pdf?v=16557482052875106426\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528075743397,"sku":"FDGL-07","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/2020-2023_Jeep-Gladiator-JT-Slim-Fender-Flares_Offtruck-2.jpg?v=1790310450"},{"product_id":"dv8-2018-2026-jeep-wrangler-jl-slim-fender-flares-fdjl-07","title":"DV8 Offroad 2018-2026 Jeep Wrangler JL Slim Fender Flares, FDJL-07","description":"\u003cp\u003eThe DV8 Offroad Wrangler JL Slim Fender Flares is made from steel and built for 2018-2026 Jeep Wrangler. Part number FDJL-07.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eOur Slim Fender Flares for the Jeep Wrangler JL were designed for a sleek and aggressive off-road style. Their slim width enables you to fit in tighter spaces on the trail. Their full steel structure provides extra protection and their slim profile offers improved articulation when off-road. The fenders include a rubber seal to protect the body panels and prevent the buildup of dust or small pebbles. The front fenders include dual stage daytime white running lights that function as amber turn signals. A micro-texture black powder coat protects the fenders from the elements. Installation is fully bolt-on, but there is an optional cut \u0026amp; paint that can be done for the cleanest look.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSlim Width to Fit through Tighter Spaces on the Trail\u003c\/li\u003e\n\u003cli\u003e\"Plug and play\" dual stage day time running light (white)\/ turn signal (amber).\u003c\/li\u003e\n\u003cli\u003eIncludes rubber seal to protect the vehicle and prevent rock\/dust buildup.\u003c\/li\u003e\n\u003cli\u003eOffers additional clearance for articulation offroad.\u003c\/li\u003e\n\u003cli\u003eFull steel structure for extra protection while offroad.\u003c\/li\u003e\n\u003cli\u003eSlim fender design for a sleek and aggressive look.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFront Rear\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFront: 6.75\" Front: 3.75\"\u003c\/li\u003e\n\u003cli\u003eMiddle: 6.25\" Middle: 3.75\"\u003c\/li\u003e\n\u003cli\u003eRear: 3.5\" Rear: 3.75\"\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2018-2026 Jeep Wrangler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JL, JLU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCab \/ roof:\u003c\/strong\u003e 2-Door, 4-Door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Cutting highly recommended----Color-matched\/black paint for the bare steel highly recommended.\u003cbr\u003eWill not work with OEM inner fender.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e FDJL-07\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 3 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 2.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 60 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 26 x 10 x 47 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/SRJL-07_Install_Guide.pdf?v=2578529806549800560\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528075874469,"sku":"FDJL-07","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/2018-2023_Jeep-Wrangler-JL-Slim-Fender-Flares_Offtruck-2.jpg?v=1790310452"},{"product_id":"rago-2022-2026-toyota-tundra-bed-channel-stiffeners-r2200ttunbcs","title":"Rago Fabrication 2022-2026 Toyota Tundra Bed Channel Stiffeners, R2200TTUNBCS","description":"\u003cp\u003eThe Rago Fabrication Tundra Bed Channel Stiffeners is made from steel and built for 2022-2026 Toyota Tundra. Part number R2200TTUNBCS.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eRago Fabrication 3rd Gen Tundra Bed Stiffeners address a common issue faced by Tundra owners. Over time, the rear sheet metal channels of Tundras can crack due to increased stress and weight from activities such as using a camper shell, bed rack, or frequent off-roading. The brackets add an additional ⅜-inch of steel, ⅛-inch stiffener plus ⅛” backer plate, for superior rigidity. Our bed stiffeners are specifically designed to reinforce and strengthen the bed of your truck, providing unmatched durability and peace of mind.\u003c\/p\u003e\u003cp\u003eInstallation is a breeze with our thoughtfully designed brackets. The brackets securely mount to the bottom of the bed using existing bolt holes, and are also mounted to the side of the bed which requires some drilling. These robust brackets ensure maximum strength and longevity, allowing you to confidently tackle any adventure.\u003c\/p\u003e\u003cp\u003ePlease Note: Some drilling is required for installation.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReinforces Truck Bed\u003c\/li\u003e\n\u003cli\u003eSold as pair | Driver and Passenger side\u003c\/li\u003e\n\u003cli\u003eSome Drilling is Required\u003c\/li\u003e\n\u003cli\u003eHigh Quality American Steel\u003c\/li\u003e\n\u003cli\u003ePowder coated Textured Black\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2022-2026 Toyota Tundra\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rago Fabrication\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e R2200TTUNBCS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hammer Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 2 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 0.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 13 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 6 x 10 x 22 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_InstallGuide_R2200TTUNBCS.pdf?v=4383076159998765236\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eRago Fabrication covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized Rago Fabrication dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50528081608869,"sku":"R2200TTUNBCS","price":152.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/2022-2023-Toyota-Tundra-Bed-Channel-Stiffeners_Offtruck-02.jpg?v=1790310485"},{"product_id":"dv8-2020-2026-jeep-gladiator-jt-spec-series-fender-flares-front-rear","title":"DV8 Offroad 2020-2026 Jeep Gladiator JT Spec Series Fender Flares Front \u0026 Rear, FDGL-06","description":"\u003cp\u003eThe DV8 Offroad Gladiator JT Spec Series Fender Flares Front \u0026amp; Rear is made from steel and built for 2020-2026 Jeep Gladiator. Part number FDGL-06.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThe Spec Series Fender Flares for the Jeep Gladiator offer increased articulation, protection, and an aggressive style. They were designed to open up additional clearance in the wheel well while continuing to offer protection to the body from debris kicked up from the tires. Replacement turn signals are incorporated in the design, and are compatible with the factory connectors so no wiring is required. They function as daytime white running lights, and as amber blinkers when signaling a turn. A rubber seal is included that protects the body and helps to prevent pebbles\/dust from building up at the seam. The fenders are finished in a micro-texture powder coat, and the aluminum accent panels are finished in a satin black powder coat. These both protect your vehicle from rust in wet conditions. Please Note: Cutting or grinding down one of the factory fender mounts is required for installation. Painting the resulting small area of raw steel is recommended to prevent rust.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eState of the art aggressive design!\u003c\/li\u003e\n\u003cli\u003eSatin powder coated Spec Series specific mesh.\u003c\/li\u003e\n\u003cli\u003e\"Plug and play\" dual stage daytime running light (white)\/ turn signal (amber).\u003c\/li\u003e\n\u003cli\u003eIncludes rubber seal to protect the vehicle and prevent rock\/dust buildup.\u003c\/li\u003e\n\u003cli\u003eOffers additional clearance for articulation offroad.\u003c\/li\u003e\n\u003cli\u003eFull steel structure for extra protection while offroad.\u003c\/li\u003e\n\u003cli\u003eDimensions:\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFront Rear\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFront:6.5\" Front:3\"\u003c\/li\u003e\n\u003cli\u003eMiddle:6\" Middle:4\"\u003c\/li\u003e\n\u003cli\u003eRear: 3.5\" Rear:3\"\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2020-2026 Jeep Gladiator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCab \/ roof:\u003c\/strong\u003e 4-Door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed length:\u003c\/strong\u003e 60\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Cutting\/grinding down one of the factory fender mounts is required. Paint for the bare steel is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e FDGL-06\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 3 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 2.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 103 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 30 x 12 x 55 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/RBTT2-04_Install_Guide_Final.pdf?v=14010979532112325647\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528083247269,"sku":"FDGL-06","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/jeep-gladiator-fender-flares.jpg?v=1790310504"},{"product_id":"rago-2005-2023-toyota-tacoma-shackle-hangers-r0522ttacrs-2","title":"Rago Fabrication 2005-2023 Toyota Tacoma Shackle Hangers, R0522TTACRS-2","description":"\u003cp\u003eThe Rago Fabrication Tacoma Shackle Hangers is made from steel and built for 2005-2023 Toyota Tacoma. Part number R0522TTACRS-2.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eIf you want your suspension to perform in the way you had always dreamed, an upgraded shackle hanger is the way to go. Simply put, the stock shackle hangers are not cutting the bill when a high performance suspension system is added to the Tacoma.\u003c\/p\u003e\u003cp\u003eWhy is that? when you upgrade your suspension system, the new leaf springs allow the suspension to droop or (go down) more than stock, putting more strain on the stock hangers. This can cause a multitude of problems, including breaking your shackles, shuttering rear ends, and decreasing your ride performance. With this complete factory replacement, you'll see, performance increases in your suspension cycling, improved geometry, increased droop travel and more.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLarger Shackles with Poly Bushings included\u003c\/li\u003e\n\u003cli\u003eGrease fittings in each Shackle\u003c\/li\u003e\n\u003cli\u003eComes pre assembled\u003c\/li\u003e\n\u003cli\u003e2 Stage Powder Coat - Textured Black\u003c\/li\u003e\n\u003cli\u003eIncreased Durability\u003c\/li\u003e\n\u003cli\u003eComplete Factory Replacement\u003c\/li\u003e\n\u003cli\u003eProfessional Install Recommended\u003c\/li\u003e\n\u003cli\u003eAll Mounting Hardware Included\u003c\/li\u003e\n\u003cli\u003eNo Welding Required 100% Bolt-On\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2005-2023 Toyota Tacoma\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rago Fabrication\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e R0522TTACRS-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hammer Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 3 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 1 hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 37.1 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 8 x 20 x 20 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/youtu.be\/m7IMU49iv8c\" target=\"_blank\" rel=\"noopener\"\u003eInstallation video\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eRago Fabrication covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized Rago Fabrication dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50528086098085,"sku":"R0522TTACRS-2","price":519.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/Shackle_1.jpg?v=1790310537"},{"product_id":"dv8-2018-2026-jeep-wrangler-jl-spec-series-tube-fenders-fdjl-06","title":"DV8 Offroad 2018-2026 Jeep Wrangler JL Spec Series Tube Fenders, FDJL-06","description":"\u003cp\u003eThe DV8 Offroad Wrangler JL Spec Series Tube Fenders is made from steel and built for 2018-2026 Jeep Wrangler. Part number FDJL-06.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eOur Spec Series Tube Fenders bring together improved performance and style to your Jeep. These fenders maximize articulation off-road while still protecting the sides of the Jeep from debris. A provided rubber seal protects the body panels and prevents dust\/small rocks from building up at the seam. The steel tube \u0026amp; plate structure of the fender flares help to keep small branches or rocks from contacting your body panels.\u003c\/p\u003e\u003cp\u003eThe front fenders feature white daytime running lights that function as amber turn signals when engaged. No wiring is required to connect the lights, their plug and play harness connects to the factory connector. The flares are finished in a micro-texture black powder coat, and the aluminum accent panel is finished in a satin black powder coat. Installation is a bolt-on process, however cutting or grinding down one of the factory mounts is required.\u003c\/p\u003e\u003cp\u003ePlease Note: These are NOT compatible with factory inner fender liners. We offer \u003ca href=\"\/products\/dv8-2018-2025-jeep-wrangler-jl-gladiator-jt-front-inner-fenders-infend-06fb\" title=\"DV8 Offroad 2018-2025 Jeep Wrangler JL \u0026amp; Gladiator JT Front Inner Fenders, INFEND-06FB\"\u003eINFEND-06FB\u003c\/a\u003e and \u003ca href=\"\/products\/dv8-2018-2026-jeep-wrangler-jl-rear-inner-fenders-infend-06rb\" title=\"DV8 Offroad 2018-2026 Jeep Wrangler JL Rear Inner Fenders, INFEND-06RB\"\u003eINFEND-06RB\u003c\/a\u003e as replacements.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteel Tube \u0026amp; Plate Construction\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Play Dual Stage Daytime Running Light \u0026amp; Turn Signal\u003c\/li\u003e\n\u003cli\u003eSpec Series Aluminum Accent Plate\u003c\/li\u003e\n\u003cli\u003eRubber Seal to Protect Fender Panels from Debris Buildup\u003c\/li\u003e\n\u003cli\u003eOffers Additional Clearance for Articulation Off-Road\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2018-2026 Jeep Wrangler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JL, JLU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCab \/ roof:\u003c\/strong\u003e 2-Door, 4-Door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Cutting\/grinding down one of the factory fender mounts is required. Paint for the bare steel is recommended.\u003cbr\u003eFor Jeeps not equipped with LED lights from factory, an aftermarket programmer or dealership programming may be required to access OEM style LED functions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e FDJL-06\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 3 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 2.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 41 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 25 x 16 x 49 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/RBJL-09_Install_Guide.pdf?v=2116968533237610388\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528086196389,"sku":"FDJL-06","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/2018-2023-jeep-wrangler-jl-tube-fenders-spec-series.jpg?v=1790310539"},{"product_id":"dv8-2021-2026-ford-bronco-tube-fender-flares-fdbr-01","title":"DV8 Offroad 2021-2026 Ford Bronco Tube Fender Flares, FDBR-01","description":"\u003cp\u003eThe DV8 Offroad Bronco Tube Fender Flares is made from steel and built for 2021-2026 Ford Bronco. Part number FDBR-01.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eOur 6th Gen Bronco Fender Flares were designed to provide additional clearance for articulation when off-road, and to protect the body from trail debris. These plate steel fenders flare outwards from the body and are finished with tube steel at the outer edge, giving the Bronco a more aggressive look. They are 4-inches wide at the front and taper down to 3.75-inches towards the rear.\u003c\/p\u003e\u003cp\u003eA rubber seal is provided to prevent dust or small rock from building up where the flares meet the body. These fit both Sasquatch and non-Sasquatch equipped models. Installation is a quick and easy process that requires no modification or drilling.\u003c\/p\u003e\u003cp\u003e** Please Note: These are NOT compatible with the Raptor or Everglades models.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOffers Additional Clearance for Increased Articulation\u003c\/li\u003e\n\u003cli\u003eRubber Seal to Prevent Dust\/Rock Buildup\u003c\/li\u003e\n\u003cli\u003eConstructed of Tube \u0026amp; Plate Steel\u003c\/li\u003e\n\u003cli\u003eProtects the Body From Damage by Trail Debris\u003c\/li\u003e\n\u003cli\u003eCompatible with Sasquatch Package\u003c\/li\u003e\n\u003cli\u003eSimple Bolt-On Installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2021-2026 Ford Bronco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCab \/ roof:\u003c\/strong\u003e 4-Door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e RAPTOR, EVERGLADES\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e FDBR-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 3 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 2 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 58 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 30 x 9 x 47 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/MPGX-02_Install_Guide.pdf?v=3419168836823611344\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528089440421,"sku":"FDBR-01","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/6th-gen-bronco-tube-fender-flares_66f854fa-bcd4-4eb0-8a4e-28289188a8c0.jpg?v=1790310567"},{"product_id":"dv8-2018-2025-jeep-wrangler-jl-gladiator-jt-front-half-doors-spec-series","title":"DV8 Offroad 2018-2025 Jeep Wrangler JL \u0026 Gladiator JT Front Half Doors Spec Series, HDJL-02F","description":"\u003cp\u003eThe DV8 Offroad Wrangler JL \u0026amp; Gladiator JT Front Half Doors Spec Series is made from steel and built for 2018-2025 Jeep Gladiator, Wrangler. Part number HDJL-02F.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThe DV8 Offroad Jeep Half Doors were designed for an open air experience, while still providing protection for the passengers. With these doors it’s easier to see the trail beside and below you to keep an eye out for large rocks and other obstacles. It features a black mesh molle compatible panel at the center of the door. The design is perfect for attaching gear like pouches, a multi-tool, and other molle accessories. These panels can be removed for even better trail visibility. They can also be sanded and painted to match your body or other accessories.\u003c\/p\u003e\u003cp\u003eAnti-rattle rubber isolators keep the noise down when your Jeep is off-road. The doors also include side view mirrors. These half-doors are compatible with both the Wrangler JL \u0026amp; Gladiator JT. Installation is a simple process with a direct fitment. Hardware is included.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIncludes Door-Mounted Side Mirrors\u003c\/li\u003e\n\u003cli\u003eMolle Compatible Removable Mesh Panels\u003c\/li\u003e\n\u003cli\u003eAnti-Rattle Adjustable Rubber Isolators\u003c\/li\u003e\n\u003cli\u003eSecure Locking Handles\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eDirect Fit Installation\u003c\/li\u003e\n\u003cli\u003eHardware is Included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2018-2025 Jeep Wrangler, Gladiator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JL, JLU, JT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCab \/ roof:\u003c\/strong\u003e 2-Door\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e HDJL-02F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 2 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 1.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 101 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 5 x 31 x 40 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/LBBR-04_Install_Guide_Final.pdf?v=10646540338992162240\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528091275429,"sku":"HDJL-02F","price":1199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/gladiator-jt-half-doors.jpg?v=1790310592"},{"product_id":"dv8-2018-2025-jeep-wrangler-jl-gladiator-jt-rear-half-doors-spec-series","title":"DV8 Offroad 2018-2025 Jeep Wrangler JL \u0026 Gladiator JT Rear Half Doors Spec Series, HDJL-02R","description":"\u003cp\u003eThe DV8 Offroad Wrangler JL \u0026amp; Gladiator JT Rear Half Doors Spec Series is made from steel and built for 2018-2025 Jeep Gladiator, Wrangler. Part number HDJL-02R.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThe DV8 Offroad Jeep Half Doors were designed for an open air experience, while still providing protection for the passengers. With these doors it’s easier to see the trail beside and below you to keep an eye out for large rocks and other obstacles. It features a black mesh molle compatible panel at the center of the door. The design is perfect for attaching gear like pouches, a multi-tool, and other molle accessories. These panels can be removed for even better trail visibility. They can also be sanded and painted to match your body or other accessories.\u003c\/p\u003e\u003cp\u003eAnti-rattle rubber isolators keep the noise down when your Jeep is off-road. These half-doors are compatible with both the Wrangler JL \u0026amp; Gladiator JT. Installation is a simple process with a direct fitment. Hardware is included.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMolle Compatible Removable Mesh Panels\u003c\/li\u003e\n\u003cli\u003eAnti-Rattle Adjustable Rubber Isolators\u003c\/li\u003e\n\u003cli\u003eSecure Locking Handles\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eDirect Fit Installation\u003c\/li\u003e\n\u003cli\u003eHardware is Included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2018-2025 Jeep Wrangler, Gladiator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JL,JT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e All 2-Door Models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e HDJL-02R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 2 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 1.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 69 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 7 x 25 x 32 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/LBBR-07_Install_Guide_-_Final.pdf?v=16111430703761202419\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528091373733,"sku":"HDJL-02R","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/JTdoorsREAR_2000x1333_3.jpg?v=1790310594"},{"product_id":"dv8-2021-2026-ford-bronco-fender-flare-deletes-front-rear-fdbr-03","title":"DV8 Offroad 2021-2026 Ford Bronco Fender Flare Deletes Front \u0026 Rear, FDBR-03","description":"\u003cp\u003eThe DV8 Offroad Bronco Fender Flare Deletes Front \u0026amp; Rear is made from steel and built for 2021-2026 Ford Bronco. Part number FDBR-03.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eDV8 Offroad has designed fender flare deletes for the 2021+ Bronco in order to eliminate factory flares \u0026amp; maximize tire clearance. Removing your fender flares increases your distance to obstacles like trees \u0026amp; boulders on the sides of the trail, enabling you to fit in tighter spaces off-road.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSet Of 4 Front \u0026amp; Rear Fender Deletes\u003c\/li\u003e\n\u003cli\u003eCleans Up Fender Panels After Flare Removal\u003c\/li\u003e\n\u003cli\u003eLaser-Cut 4mm Steel\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003ePaintable Aluminum DV8 Accent Plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2021-2026 Ford Bronco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCab \/ roof:\u003c\/strong\u003e 2-Door, 4-Door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Engineered For All 4-Door Models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e 2 Door Models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e FDBR-03\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 3 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 2.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 19 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 4 x 19 x 48 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/STJL-03_Install-Manual.pdf?v=995698822963110469\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528106119333,"sku":"FDBR-03","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/bronco-fender-delete.jpg?v=1790310740"},{"product_id":"rago-1995-2023-toyota-tacoma-bed-channel-stiffeners-pair-r1620ttaccs","title":"Rago Fabrication 1995-2023 Toyota Tacoma Bed Channel Stiffeners Pair, R1620TTACCS","description":"\u003cp\u003eThe Rago Fabrication Tacoma Bed Channel Stiffeners Pair is made from steel and built for 1995-2023 Toyota Tacoma. Part number R1620TTACCS.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThe Rago Fabrication Toyota Tacoma Bed Stiffeners solve a known problem that Tacoma's acquire over time. If you have a camper shell, bed rack, or use your Tacoma to off-road frequently, the rear sheet metal channels are known to crack overtime because of added stress and weight to the vehicle. Our bed stiffeners will strengthen the bed of your truck and do not interfere with your stock bed mat.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSome drilling is required\u003c\/li\u003e\n\u003cli\u003eFactory Bed Bolt uses a T-55 \u0026amp; D-Ring uses a T-40 to remove\u003c\/li\u003e\n\u003cli\u003ePowder coated Textured Black\u003c\/li\u003e\n\u003cli\u003eSold as pair- Driver and Passenger side\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 1995-2023 Toyota Tacoma\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rago Fabrication\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e R1620TTACCS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hammer Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 2 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 0.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 7.3 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 3 x 12 x 16 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Channel_Stiffeners_Install.pdf?v=17546276609753618146\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/youtu.be\/2Hc04kLDyR4\" target=\"_blank\" rel=\"noopener\"\u003eInstallation video\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eRago Fabrication covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized Rago Fabrication dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50528109133989,"sku":"R1620TTACCS","price":122.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/Toyota-Tacoma-Bed-Channel-Stiffeners-2.jpg?v=1790310764"},{"product_id":"dv8-2018-2026-jeep-wrangler-jl-gladiator-jt-hood-hold-down-d-jl-190001-k","title":"DV8 Offroad 2018-2026 Jeep Wrangler JL \u0026 Gladiator JT Hood Hold Down, D-JL-190001-K","description":"\u003cp\u003eThe DV8 Offroad Wrangler JL \u0026amp; Gladiator JT Hood Hold Down is made from plastic and built for 2018-2026 Jeep Gladiator, Wrangler. Part number D-JL-190001-K.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eEver drive down the road and notice a little flutter in your Jeep's hood? Have you replaced the stock, rubber hood hold downs that came with your Jeep? DV8's race-inspired hood hold downs feature a billet aluminum turnbuckle and stainless steel heim joints. The quick-release push pin provides easy access to opening your hood and won't be lost thanks to the attached, stainless steel lanyard. Also available in a lockable version to help prevent any under-hood theft or tampering.\u003c\/p\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2018-2026 Jeep Wrangler, Gladiator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JL, JLU, JT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCab \/ roof:\u003c\/strong\u003e 2-Door, 4-Door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed length:\u003c\/strong\u003e 60\"\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e D-JL-190001-K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 1 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 1 hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 1.4 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 2 x 8 x 13 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528123584677,"sku":"D-JL-190001-K","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/2018-21-jeep-jl-2020-21-jt-hood-hold-down-dv8-offroad-d-jl-190001-k.jpg?v=1790310910"},{"product_id":"dv8-2007-2018-jeep-jk-replacement-ball-joint-kit-dana-30-or-dana-44","title":"DV8 Offroad 2007-2018 Jeep JK Replacement Ball Joint Kit Dana 30 or Dana 44, D-JKBLJNT-01","description":"\u003cp\u003eThe DV8 Offroad JK Replacement Ball Joint Kit Dana 30 or Dana 44 is made from steel and built for 2007-2018 Jeep Wrangler. Part number D-JKBLJNT-01.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eDV8's Jeep Wrangler JK Replacement Ball Joint Kit is designed for rugged off-road use. DV8 uses SAE4140 chromoly steel studs and SAE1045 steel housings to make one of the toughest ball joints on the market. These ball joints are also greaseable which allows for standard maintenance and increased longevity. The grooves on the side of the housing are closer together resulting in superior resistance to turning that can occur and also helps makes the install easier.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSAE4140 And SAE1045 Steel\u003c\/li\u003e\n\u003cli\u003eGreaseable\u003c\/li\u003e\n\u003cli\u003e1-Year Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2007-2018 Jeep Wrangler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JK, JKU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCab \/ roof:\u003c\/strong\u003e 2-Door, 4-Door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Works For Both D44\/ D30 Axles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e D-JKBLJNT-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 5 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 6 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Taiwan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 5 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 7 x 7 x 11 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528126206117,"sku":"D-JKBLJNT-01","price":219.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/2007-18-jeep-jk-replacement-ball-joint-kit-dana-30-or-dana-44-dv8-offroad-d-jkbljnt-01.jpg?v=1790310924"},{"product_id":"dv8-2018-2026-jeep-jl-gladiator-jt-t-handles-hard-top-billet-htjl-h","title":"DV8 Offroad 2018-2026 Jeep JL \u0026 Gladiator JT T-Handles for Hard Top Billet, HTJL-H","description":"\u003cp\u003eThe DV8 Offroad JL \u0026amp; Gladiator JT T-Handles for Hard Top Billet is made from aluminum and built for 2018-2026 Jeep Gladiator, Wrangler. Part number HTJL-H.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThe HTJL-H Jeep Wrangler JL Hard Top Handle Kit is designed to replace the brittle, plastic OEM hardtop closure handles with strong billet aluminum handles. These handles are precision made by CNC, and then anodized for a clean black finish. The kit comes with all hardware necessary to mount your new handles, and each kit comes complete with 6 handles.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplace Brittle OEM Handles\u003c\/li\u003e\n\u003cli\u003eMade Of High Grade Aluminum\u003c\/li\u003e\n\u003cli\u003eCnc Precision Made\u003c\/li\u003e\n\u003cli\u003eAnodized Black Finish\u003c\/li\u003e\n\u003cli\u003eCome With All Hardware\u003c\/li\u003e\n\u003cli\u003eSold As: Set Of 6\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2018-2026 Jeep Wrangler, Gladiator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JL, JLU, JT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCab \/ roof:\u003c\/strong\u003e 2-Door, 4-Door\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e HTJL-H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 1 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 1 hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 2 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 4 x 6 x 6 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528126304421,"sku":"HTJL-H","price":144.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/2018-21-jeep-jl-t-handles-for-hard-top-billet-dv8-offroad-htjl-h.jpg?v=1790310925"},{"product_id":"dv8-2018-2026-jeep-jl-4-door-razor-series-fastback-hard-top-htjl02-b","title":"DV8 Offroad 2018-2026 Jeep JL 4 Door Razor Series Fastback Hard Top, HTJL02-B","description":"\u003cp\u003eThe DV8 Offroad JL 4 Door Razor Series Fastback Hard Top is built for 2018-2026 Jeep Wrangler. Part number HTJL02-B.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eDV8 Offroad Razor Series Fastback Hard Tops are built in the United States and use high quality seals, fiberglass, and advanced aerodynamics to produce the quietest tops on the market. This DV8 top is a 2-piece design, so the section above the driver and passenger lifts off like a Targa top. All tops have carpeted interior and tinted windows. This top is fitted for the 4-Door Jeep Wrangler JL Unlimited. NOTE: If you currently have a soft top, you will need part #\u003ca href=\"\/products\/dv8-2018-2026-jeep-jl-jt-oem-style-hard-top-brackets-htjl-br\" title=\"DV8 Offroad 2018-2026 Jeep JL \u0026amp; JT OEM-Style Hard Top Brackets, HTJL-BR\"\u003eHTJL-BR\u003c\/a\u003e for installation of this product.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHand Laid Honeycomb Reinforced Fiberglass For Added Durability\u003c\/li\u003e\n\u003cli\u003e31 Percent Tint Dot Approved Glass\u003c\/li\u003e\n\u003cli\u003eMilitary Grade Carpeted Headliner For Increased Insulation And Noise Reduction\u003c\/li\u003e\n\u003cli\u003eExtra Thick Uv Stable Gel Coat\u003c\/li\u003e\n\u003cli\u003eQuick Release Latching System\u003c\/li\u003e\n\u003cli\u003eImproved Aerodynamic Shape\u003c\/li\u003e\n\u003cli\u003eRear Spoiler Lip\u003c\/li\u003e\n\u003cli\u003eDefrost Rear Windows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2018-2026 Jeep Wrangler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JLU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCab \/ roof:\u003c\/strong\u003e 4-Door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Needs HTJL-BR If Jeep Only Had Softop\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e HTJL02-B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Mixed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 5 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 300 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 72 x 48 x 90 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout — this item ships by truck freight (curbside delivery).\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528126369957,"sku":"HTJL02-B","price":3999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/HTJL02-B_Installed-13.jpg?v=1790310926"},{"product_id":"dv8-2007-2018-jeep-wrangler-jk-rear-rock-doors-rdsttb-01r","title":"DV8 Offroad 2007-2018 Jeep Wrangler JK Rear Rock Doors, RDSTTB-01R","description":"\u003cp\u003eThe DV8 Offroad Wrangler JK Rear Rock Doors is made from steel and built for 2007-2018 Jeep Wrangler. Part number RDSTTB-01R.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eDV8 Wrangler JK Rock Doors provide protection and security, while still allowing for an open air door-less experience. These rock doors feature a fully plated design to provide maximum protection from brush and debris.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLimit Straps To Control Opening\u003c\/li\u003e\n\u003cli\u003eRattle Preventing Stopper\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2007-2018 Jeep Wrangler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JKU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCab \/ roof:\u003c\/strong\u003e 4-Door\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e RDSTTB-01R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 3 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 2 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 53 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 8 x 22 x 32 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528127156389,"sku":"RDSTTB-01R","price":479.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/2007-18-jeep-wrangler-jk-rock-doors-dv8-offroad-2_ce5020db-b155-4335-aff3-1af92268c95b.jpg?v=1790310936"},{"product_id":"dv8-2007-2018-jeep-jk-4-door-fastback-hard-top-ht07fb42","title":"DV8 Offroad 2007-2018 Jeep JK 4-Door Fastback Hard Top, HT07FB42","description":"\u003cp\u003eThe DV8 Offroad JK 4-Door Fastback Hard Top is built for 2007-2018 Jeep Wrangler. Part number HT07FB42.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eDV8 Off Road Ranger Jeep JK Hard Tops are built in the United States and use high quality seals, fiberglass, and advanced aerodynamics to produce the quietest tops on the market. All of DV8 tops are a 2-piece design so the part over the front driver and passenger lifts off like a Targa top. All tops have carpeted interior and tinted windows. This top is a Fast Back 2-Piece for the Jeep Wrangler JK 4-Door.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTop Has Carpeted Interior\u003c\/li\u003e\n\u003cli\u003eTinted Windows\u003c\/li\u003e\n\u003cli\u003eA Flat Shipping Surcharge Of 350 Dollars Applies To The Lower 48 States\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2007-2018 Jeep Wrangler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JKU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCab \/ roof:\u003c\/strong\u003e 4-Door\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e HT07FB42\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Mixed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 5 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 2 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 300 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 90 x 48 x 72 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout — this item ships by truck freight (curbside delivery).\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528129581221,"sku":"HT07FB42","price":3299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/2007-2018-Jeep-JK-4-Door-Fastback-Hard-Top.jpg?v=1790310951"},{"product_id":"dv8-2007-2018-jeep-jk-2-door-square-back-hard-top-ht07sb22","title":"DV8 Offroad 2007-2018 Jeep JK 2-Door Square Back Hard Top, HT07SB22","description":"\u003cp\u003eThe DV8 Offroad JK 2-Door Square Back Hard Top is built for 2007-2018 Jeep Wrangler. Part number HT07SB22.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eDV8 Offroad Ranger 2-Door Jeep JK Hard Tops are built in the United States and use high quality seals, fiberglass, and advanced aerodynamics to produce the quietest tops on the market. This top is a 2-piece design, so the part over the front driver and passenger lifts off like a Targa top. The roof has a carpeted interior, as well as tinted windows.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTop Has Carpeted Interior\u003c\/li\u003e\n\u003cli\u003eTinted Windows\u003c\/li\u003e\n\u003cli\u003eA Flat Shipping Surcharge Of 350 Dollars Applies To The Lower 48 States\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e 2007-2018 Jeep Wrangler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-model:\u003c\/strong\u003e JK\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DV8 Offroad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e HT07SB22\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Mixed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e 5 of 5 (1 = easy, 5 = hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e 2 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 300 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions (L x W x H):\u003c\/strong\u003e 90 x 48 x 72 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eShips directly from the manufacturer. Typical manufacturer processing time is 1 business day; transit time depends on your location. Shipping is calculated at checkout — this item ships by truck freight (curbside delivery).\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eDV8 Offroad covers this product with a 1-year manufacturer warranty. Contact Urban Supply for warranty details before you buy.\u003c\/p\u003e\u003cp\u003eUrban Supply is an authorized DV8 Offroad dealer (Horsepower Automotive Group).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50528129646757,"sku":"HT07SB22","price":2899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/2007-18-jeep-jk-2-door-square-back-hard-top-dv8-offroad-ht07sb22.jpg?v=1790310952"}],"url":"https:\/\/www.urbansupplyinc.com\/collections\/off-road-body-armor.oembed","provider":"Urban Supply Incorporated","version":"1.0","type":"link"}