{"title":"Excavator Attachments for 20+ Metric Ton Excavators","description":"\u003cp\u003eHeavy attachments rated for large excavators over 20 metric tons: side-grip and tilting vibro hammers, impact pile hammers, large hydraulic breakers and vibro rippers. Every listing states the carrier weight range it is built for.\u003c\/p\u003e\u003cp\u003eThese machines are sold by quote. Send us your carrier make, model, operating weight and auxiliary hydraulic flow and pressure, and we will confirm the right model.\u003c\/p\u003e","products":[{"product_id":"ramex-sg-sgm-side-grip-vibro-hammer","title":"RAMEX SG \u0026 SGM Side-Grip Vibro Hammer for 15–50 Metric Ton Excavators","description":"\u003cp\u003eThe RAMEX SG and SGM side-grip vibratory hammers mount on 15–50 metric ton excavators, clamp the pile from the side with a hydraulic clamp, and drive or extract it with an eccentric vibration system. SG models use a fixed sheet-pile clamp for sheet piles, I-beams and H-beams; SGM models add RAMEX's modular universal jaw system, so one machine also handles steel pipe and timber piles.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFour sizes from the SGM 300 (15–20 t excavators) to the SG\/SGM 900 (37–50 t excavators)\u003c\/li\u003e\n\u003cli\u003eSG: fixed sheet-pile clamp for sheet piles, I-beams and H-beams\u003c\/li\u003e\n\u003cli\u003eSGM: interchangeable modular clamps — sheet-pile clamps, tube clamps for steel pipe from ø90 mm up to ø660 mm depending on model, and timber clamps for round and square timber piles\u003c\/li\u003e\n\u003cli\u003eAsk which clamp sets are included with your quote — RAMEX supplies the sheet-pile and tube clamps for SGM machines as additional sets\u003c\/li\u003e\n\u003cli\u003e360° rotation and 30° tilt\u003c\/li\u003e\n\u003cli\u003eIn-cab display and inclination sensor give the operator real-time alignment guidance\u003c\/li\u003e\n\u003cli\u003eSheet piles from 6 m to 14 m long depending on model\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cdiv class=\"table-wrapper\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSGM 300\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSG \/ SGM 500\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSG \/ SGM 700\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSG \/ SGM 900\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcavator class\u003c\/th\u003e\n\u003ctd\u003e15–20 t (33,100–44,100 lb)\u003c\/td\u003e\n\u003ctd\u003e20–28 t (44,100–61,700 lb)\u003c\/td\u003e\n\u003ctd\u003e28–35 t (61,700–77,200 lb)\u003c\/td\u003e\n\u003ctd\u003e37–50 t (81,600–110,200 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEccentric moment\u003c\/th\u003e\n\u003ctd\u003e3.5 kg·m (25.3 lb·ft)\u003c\/td\u003e\n\u003ctd\u003e5.1 kg·m (36.9 lb·ft)\u003c\/td\u003e\n\u003ctd\u003e6.8 kg·m (49.2 lb·ft)\u003c\/td\u003e\n\u003ctd\u003e9.1 kg·m (65.8 lb·ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCentrifugal force\u003c\/th\u003e\n\u003ctd\u003e350 kN (78,680 lbf)\u003c\/td\u003e\n\u003ctd\u003e454 kN (102,060 lbf)\u003c\/td\u003e\n\u003ctd\u003e606 kN (136,230 lbf)\u003c\/td\u003e\n\u003ctd\u003e780 kN (175,350 lbf)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFrequency\u003c\/th\u003e\n\u003ctd\u003e2,700–3,000 rpm\u003c\/td\u003e\n\u003ctd\u003e2,700–3,000 rpm\u003c\/td\u003e\n\u003ctd\u003e2,700–3,000 rpm\u003c\/td\u003e\n\u003ctd\u003e2,500–3,000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eService weight\u003c\/th\u003e\n\u003ctd\u003e1,850 kg (4,079 lb)\u003c\/td\u003e\n\u003ctd\u003e3,035 kg (6,691 lb)\u003c\/td\u003e\n\u003ctd\u003e3,650 kg (8,047 lb)\u003c\/td\u003e\n\u003ctd\u003e3,800 kg (8,378 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSide clamp cylinder force\u003c\/th\u003e\n\u003ctd\u003e50 t-force (110,230 lbf)\u003c\/td\u003e\n\u003ctd\u003e60 t-force (132,280 lbf)\u003c\/td\u003e\n\u003ctd\u003e70 t-force (154,320 lbf)\u003c\/td\u003e\n\u003ctd\u003e90 t-force (198,420 lbf)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBottom clamp cylinder force\u003c\/th\u003e\n\u003ctd\u003e60 t-force (132,280 lbf)\u003c\/td\u003e\n\u003ctd\u003e60 t-force (132,280 lbf)\u003c\/td\u003e\n\u003ctd\u003e70 t-force (154,320 lbf)\u003c\/td\u003e\n\u003ctd\u003e90 t-force (198,420 lbf)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (L × W × H)\u003c\/th\u003e\n\u003ctd\u003e2,450 × 1,200 × 1,250 mm (96.5 × 47.2 × 49.2 in)\u003c\/td\u003e\n\u003ctd\u003e2,577 × 1,380 × 1,482 mm (101.5 × 54.3 × 58.3 in)\u003c\/td\u003e\n\u003ctd\u003e2,650 × 1,465 × 1,525 mm (104.3 × 57.7 × 60 in)\u003c\/td\u003e\n\u003ctd\u003e2,700 × 1,500 × 1,585 mm (106.3 × 59.1 × 62.4 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e140 L\/min (37 gpm)\u003c\/td\u003e\n\u003ctd\u003e170–200 L\/min (44.9–52.8 gpm)\u003c\/td\u003e\n\u003ctd\u003e210–240 L\/min (55.5–63.4 gpm)\u003c\/td\u003e\n\u003ctd\u003e260–280 L\/min (68.7–74 gpm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax. setting pressure\u003c\/th\u003e\n\u003ctd\u003e300 bar (4,351 psi)\u003c\/td\u003e\n\u003ctd\u003e250 bar (3,626 psi)\u003c\/td\u003e\n\u003ctd\u003e280 bar (4,061 psi)\u003c\/td\u003e\n\u003ctd\u003e280 bar (4,061 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRotation \/ tilt\u003c\/th\u003e\n\u003ctd\u003e360° \/ 30°\u003c\/td\u003e\n\u003ctd\u003e360° \/ 30°\u003c\/td\u003e\n\u003ctd\u003e360° \/ 30°\u003c\/td\u003e\n\u003ctd\u003e360° \/ 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChangeable clamps\u003c\/th\u003e\n\u003ctd\u003eSGM: yes\u003c\/td\u003e\n\u003ctd\u003eSGM: yes\u003c\/td\u003e\n\u003ctd\u003eSGM: yes\u003c\/td\u003e\n\u003ctd\u003eSGM: yes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDisplay and inclination sensor\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet pile length\u003c\/th\u003e\n\u003ctd\u003e6, 8, 10, 12 m (20, 26, 33, 39 ft)\u003c\/td\u003e\n\u003ctd\u003e6, 8, 10, 12 m (20, 26, 33, 39 ft)\u003c\/td\u003e\n\u003ctd\u003e8, 10, 12, 14 m (26, 33, 39, 46 ft)\u003c\/td\u003e\n\u003ctd\u003e8, 10, 12, 14 m (26, 33, 39, 46 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTube range, universal-clamp models\u003c\/th\u003e\n\u003ctd\u003eø90–ø150 mm (3.5–5.9 in)\u003c\/td\u003e\n\u003ctd\u003eø130–ø260 \/ ø260–ø430 \/ ø430–ø600 mm (5.1–10.2 \/ 10.2–16.9 \/ 16.9–23.6 in)\u003c\/td\u003e\n\u003ctd\u003eø130–ø220 \/ ø220–ø430 \/ ø430–ø660 mm (5.1–8.7 \/ 8.7–16.9 \/ 16.9–26 in)\u003c\/td\u003e\n\u003ctd\u003eø130–ø220 \/ ø220–ø430 \/ ø430–ø660 mm (5.1–8.7 \/ 8.7–16.9 \/ 16.9–26 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp\u003e\u003cem\u003eSpecifications as published by RAMEX (RAMEX brochure \"RAMEX VIBRO SIDE GRIP AND TILTING\", Sidegrip Vibro technical data). US-unit figures are converted from the metric values and rounded. We confirm the exact model and configuration with your quote.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cp\u003eMatch the model to your excavator class and confirm your auxiliary flow and relief pressure against the table before ordering.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eRAMEX standard warranty: 12 months or 1,000 operating hours, whichever comes first. We confirm the full warranty terms with your quote.\u003c\/p\u003e\u003ch2\u003eLead time and delivery\u003c\/h2\u003e\u003cp\u003eTypically built to order. When no finished unit is available, RAMEX typically quotes 10–12 weeks of production, plus ocean freight to the US. Ask about ready units: we confirm current availability, lead time and a delivered price to your site with every quote. Delivered pricing is quoted per job.\u003c\/p\u003e\u003ch2\u003eRequest a quote\u003c\/h2\u003e\u003cp\u003eThis machine is sold by quote. Use \u003cstrong\u003eRequest a Quote\u003c\/strong\u003e and include your carrier's make, model and operating weight, its auxiliary hydraulic flow and relief pressure, the job (pile type, material or application) and your delivery ZIP code.\u003c\/p\u003e","brand":"RAMEX","offers":[{"title":"SGM 300","offer_id":50891021090981,"sku":"SGM 300","price":0.0,"currency_code":"USD","in_stock":false},{"title":"SG 500","offer_id":50891021123749,"sku":"SG 500","price":0.0,"currency_code":"USD","in_stock":false},{"title":"SGM 500","offer_id":50891021156517,"sku":"SGM 500","price":0.0,"currency_code":"USD","in_stock":false},{"title":"SG 700","offer_id":50891021189285,"sku":"SG 700","price":0.0,"currency_code":"USD","in_stock":false},{"title":"SGM 700","offer_id":50891021222053,"sku":"SGM 700","price":0.0,"currency_code":"USD","in_stock":false},{"title":"SG 900","offer_id":50891021254821,"sku":"SG 900","price":0.0,"currency_code":"USD","in_stock":false},{"title":"SGM 900","offer_id":50891021287589,"sku":"SGM 900","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/ramex-sg-sgm-side-grip-vibro-hammer-mounted-on-an-excavator-outside-the-factory.jpg?v=1792904169"},{"product_id":"ramex-art-auto-tilting-vibro-hammer","title":"RAMEX ART Auto-Tilting Vibro Hammer for 18–55 Metric Ton Excavators","description":"\u003cp\u003eThe RAMEX ART auto-tilting vibro hammer combines 360° continuous rotation with a 90° automatic tilt, so a single excavator operator can pick a sheet pile or profile up from horizontal on the ground, bring it vertical and drive it without extra ground crew. Four models cover 18–55 metric ton excavators. Some RAMEX documents list these models as RT250–RT550.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e360° continuous rotation and 90° automatic tilting\u003c\/li\u003e\n\u003cli\u003eOne operator can handle, align and drive sheet piles, H-beams, pipes and other profiles\u003c\/li\u003e\n\u003cli\u003eSuitable for inclined pile installation\u003c\/li\u003e\n\u003cli\u003eCustom interchangeable lower clamps available for specialized profiles\u003c\/li\u003e\n\u003cli\u003eEccentric vibration system for driving and extraction\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cdiv class=\"table-wrapper\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eART250\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eART300\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eART400\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eART550\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCarrier weight\u003c\/th\u003e\n\u003ctd\u003e18–26 t (39,700–57,300 lb)\u003c\/td\u003e\n\u003ctd\u003e27–36 t (59,500–79,400 lb)\u003c\/td\u003e\n\u003ctd\u003e37–46 t (81,600–101,400 lb)\u003c\/td\u003e\n\u003ctd\u003e47–55 t (103,600–121,300 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFrequency\u003c\/th\u003e\n\u003ctd\u003e3,400–3,800 vibrations\/min\u003c\/td\u003e\n\u003ctd\u003e3,000–3,200 vibrations\/min\u003c\/td\u003e\n\u003ctd\u003e2,800–3,000 vibrations\/min\u003c\/td\u003e\n\u003ctd\u003e2,600–2,900 vibrations\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEccentric moment\u003c\/th\u003e\n\u003ctd\u003e2.8 kg·m (20.3 lb·ft)\u003c\/td\u003e\n\u003ctd\u003e4.7 kg·m (34 lb·ft)\u003c\/td\u003e\n\u003ctd\u003e6.8 kg·m (49.2 lb·ft)\u003c\/td\u003e\n\u003ctd\u003e9 kg·m (65.1 lb·ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCentrifugal force\u003c\/th\u003e\n\u003ctd\u003e360 kN (80,930 lbf)\u003c\/td\u003e\n\u003ctd\u003e580 kN (130,390 lbf)\u003c\/td\u003e\n\u003ctd\u003e690 kN (155,120 lbf)\u003c\/td\u003e\n\u003ctd\u003e800 kN (179,850 lbf)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSetting pressure\u003c\/th\u003e\n\u003ctd\u003e250 bar (3,626 psi)\u003c\/td\u003e\n\u003ctd\u003e250 bar (3,626 psi)\u003c\/td\u003e\n\u003ctd\u003e280 bar (4,061 psi)\u003c\/td\u003e\n\u003ctd\u003e280 bar (4,061 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e180–200 L\/min (47.6–52.8 gpm)\u003c\/td\u003e\n\u003ctd\u003e220–240 L\/min (58.1–63.4 gpm)\u003c\/td\u003e\n\u003ctd\u003e260–280 L\/min (68.7–74 gpm)\u003c\/td\u003e\n\u003ctd\u003e300–320 L\/min (79.3–84.5 gpm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSlewing \/ tilting\u003c\/th\u003e\n\u003ctd\u003e360° \/ 90°\u003c\/td\u003e\n\u003ctd\u003e360° \/ 90°\u003c\/td\u003e\n\u003ctd\u003e360° \/ 90°\u003c\/td\u003e\n\u003ctd\u003e360° \/ 90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eService weight\u003c\/th\u003e\n\u003ctd\u003e1,850 kg (4,079 lb)\u003c\/td\u003e\n\u003ctd\u003e2,190 kg (4,828 lb)\u003c\/td\u003e\n\u003ctd\u003e2,385 kg (5,258 lb)\u003c\/td\u003e\n\u003ctd\u003e2,725 kg (6,008 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (L × W × H)\u003c\/th\u003e\n\u003ctd\u003e2,057 × 1,353 × 740 mm (81 × 53.3 × 29.1 in)\u003c\/td\u003e\n\u003ctd\u003e2,252 × 1,319 × 822 mm (88.7 × 51.9 × 32.4 in)\u003c\/td\u003e\n\u003ctd\u003e2,259 × 1,403 × 875 mm (88.9 × 55.2 × 34.4 in)\u003c\/td\u003e\n\u003ctd\u003e2,398 × 1,487 × 921 mm (94.4 × 58.5 × 36.3 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExtension boom weight\u003c\/th\u003e\n\u003ctd\u003e645 kg (1,422 lb)\u003c\/td\u003e\n\u003ctd\u003e730 kg (1,609 lb)\u003c\/td\u003e\n\u003ctd\u003e820 kg (1,808 lb)\u003c\/td\u003e\n\u003ctd\u003e860 kg (1,896 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp\u003e\u003cem\u003eSpecifications as published by RAMEX (RAMEX brochure \"RAMEX VIBRO SIDE GRIP AND TILTING\", ART tech. spec page). US-unit figures are converted from the metric values and rounded. We confirm the exact model and configuration with your quote.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cp\u003eEach model lists the matching extension boom weight; confirm boom supply and your carrier's flow and pressure with your quote.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eRAMEX standard warranty: 12 months or 1,000 operating hours, whichever comes first. We confirm the full warranty terms with your quote.\u003c\/p\u003e\u003ch2\u003eLead time and delivery\u003c\/h2\u003e\u003cp\u003eTypically built to order. When no finished unit is available, RAMEX typically quotes 10–12 weeks of production, plus ocean freight to the US. Ask about ready units: we confirm current availability, lead time and a delivered price to your site with every quote. Delivered pricing is quoted per job.\u003c\/p\u003e\u003ch2\u003eRequest a quote\u003c\/h2\u003e\u003cp\u003eThis machine is sold by quote. Use \u003cstrong\u003eRequest a Quote\u003c\/strong\u003e and include your carrier's make, model and operating weight, its auxiliary hydraulic flow and relief pressure, the job (pile type, material or application) and your delivery ZIP code.\u003c\/p\u003e","brand":"RAMEX","offers":[{"title":"ART250","offer_id":50891022794917,"sku":"ART250","price":0.0,"currency_code":"USD","in_stock":false},{"title":"ART300","offer_id":50891022827685,"sku":"ART300","price":0.0,"currency_code":"USD","in_stock":false},{"title":"ART400","offer_id":50891022860453,"sku":"ART400","price":0.0,"currency_code":"USD","in_stock":false},{"title":"ART550","offer_id":50891022893221,"sku":"ART550","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/ramex-art-auto-tilting-vibro-hammer-mounted-on-an-excavator-front-view.jpg?v=1792904221"},{"product_id":"ramex-ram-sgh-0212-impact-pile-hammer","title":"RAMEX RAM SGH 0212 Impact Pile Hammer for 22–30 Metric Ton Excavators","description":"\u003cp\u003eThe RAMEX RAM SGH 0212 is a hydraulic impact pile hammer with a 2-metric-ton (4,409 lb) ram that mounts on the arm of a 22–30 metric ton excavator with a sliding bracket. Its stroke adjusts from 200 to 1,200 mm (0.66–3.94 ft), for 4 to 24 kN·m (2,950–17,700 ft·lbf) of potential energy per blow on pipe piles.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e2-metric-ton (4,409 lb) ram with adjustable 200–1,200 mm stroke\u003c\/li\u003e\n\u003cli\u003e42 blows per minute at maximum stroke, 60 at minimum stroke\u003c\/li\u003e\n\u003cli\u003eDrives 12-inch and 18-inch pipe piles as standard; other pile sizes and shapes on request with a different pile cap\u003c\/li\u003e\n\u003cli\u003eMounted on the excavator arm with a sliding bracket; other mounting types on request\u003c\/li\u003e\n\u003cli\u003eTotal weight with drive cap and pile cap: 4,500 kg (9,921 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cdiv class=\"table-wrapper\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRAM SGH 0212\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRam weight\u003c\/th\u003e\n\u003ctd\u003e2,000 kg (4,409 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStroke\u003c\/th\u003e\n\u003ctd\u003e200–1,200 mm (7.9–47.2 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePotential energy (min. \/ max. stroke)\u003c\/th\u003e\n\u003ctd\u003e4 \/ 24 kNm (2,950 \/ 17,700 ft·lbf)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBlow rate (max. \/ min. stroke)\u003c\/th\u003e\n\u003ctd\u003e42 \/ 60 blows\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating pressure\u003c\/th\u003e\n\u003ctd\u003e210 bar (3,046 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRequired flow\u003c\/th\u003e\n\u003ctd\u003e100 L\/min (26.4 gpm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall length\u003c\/th\u003e\n\u003ctd\u003e3,990 mm (157.1 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall width\u003c\/th\u003e\n\u003ctd\u003e864 mm (34 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e1,440 mm (56.7 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHose size, supply \/ return\u003c\/th\u003e\n\u003ctd\u003e3\/4 in \/ 1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight with drive cap and pile cap\u003c\/th\u003e\n\u003ctd\u003e4,500 kg (9,921 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable base machine\u003c\/th\u003e\n\u003ctd\u003e22–30 t (48,500–66,100 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp\u003e\u003cem\u003eSpecifications as published by RAMEX (RAMEX website, Impact Hammer page (RAM SGH 0212 operating data)). US-unit figures are converted from the metric values and rounded. We confirm the exact model and configuration with your quote.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cp\u003eSuitable base machine: 22–30 metric ton excavator. Needs 100 L\/min (26.4 gpm) at 210 bar (3,046 psi), with a 3\/4-inch supply hose and 1-inch return.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eRAMEX standard warranty: 12 months or 1,000 operating hours, whichever comes first. We confirm the full warranty terms with your quote.\u003c\/p\u003e\u003ch2\u003eLead time and delivery\u003c\/h2\u003e\u003cp\u003eTypically built to order. When no finished unit is available, RAMEX typically quotes 10–12 weeks of production, plus ocean freight to the US. Ask about ready units: we confirm current availability, lead time and a delivered price to your site with every quote. Delivered pricing is quoted per job.\u003c\/p\u003e\u003ch2\u003eRequest a quote\u003c\/h2\u003e\u003cp\u003eThis machine is sold by quote. Use \u003cstrong\u003eRequest a Quote\u003c\/strong\u003e and include your carrier's make, model and operating weight, its auxiliary hydraulic flow and relief pressure, the job (pile type, material or application) and your delivery ZIP code.\u003c\/p\u003e","brand":"RAMEX","offers":[{"title":"RAM SGH 0212","offer_id":50891023089829,"sku":"RAM SGH 0212","price":0.0,"currency_code":"USD","in_stock":false}]},{"product_id":"ramex-ram-medium-series-hydraulic-breaker","title":"RAMEX RAM Medium Hydraulic Breaker for 6–22 Metric Ton Excavators","description":"\u003cp\u003eThe RAMEX RAM Medium Series covers five hydraulic breakers for 6–22 metric ton excavators, from the 450 kg (992 lb) RAM 338 to the 1,250 kg (2,756 lb) RAM 525 HSA. RAMEX designs them to deliver their breaking power at low oil flow and pressure, which keeps fuel use down on demolition jobs, tunnels and confined excavation sites.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive models for 6–22 metric ton carriers\u003c\/li\u003e\n\u003cli\u003eTool diameters from 80 to 115 mm\u003c\/li\u003e\n\u003cli\u003eImpact rates up to 990 blows per minute\u003c\/li\u003e\n\u003cli\u003eReinforced body for extra protection against impacts\u003c\/li\u003e\n\u003cli\u003eCompact enough for urban work in narrow spaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cdiv class=\"table-wrapper\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRAM 338\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRAM 345\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRAM 465 HSA\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRAM 495 HSA\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRAM 525 HSA\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCarrier weight\u003c\/th\u003e\n\u003ctd\u003e6–9 t (13,200–19,800 lb)\u003c\/td\u003e\n\u003ctd\u003e7–10 t (15,400–22,000 lb)\u003c\/td\u003e\n\u003ctd\u003e8–14 t (17,600–30,900 lb)\u003c\/td\u003e\n\u003ctd\u003e10–16 t (22,000–35,300 lb)\u003c\/td\u003e\n\u003ctd\u003e16–22 t (35,300–48,500 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating weight\u003c\/th\u003e\n\u003ctd\u003e450 kg (992 lb)\u003c\/td\u003e\n\u003ctd\u003e510 kg (1,124 lb)\u003c\/td\u003e\n\u003ctd\u003e750 kg (1,653 lb)\u003c\/td\u003e\n\u003ctd\u003e950 kg (2,094 lb)\u003c\/td\u003e\n\u003ctd\u003e1,250 kg (2,756 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eImpact rate\u003c\/th\u003e\n\u003ctd\u003e490–990 blows\/min\u003c\/td\u003e\n\u003ctd\u003e440–880 blows\/min\u003c\/td\u003e\n\u003ctd\u003e360–670 blows\/min\u003c\/td\u003e\n\u003ctd\u003e360–630 blows\/min\u003c\/td\u003e\n\u003ctd\u003e460–760 blows\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating pressure\u003c\/th\u003e\n\u003ctd\u003e120–125 bar (1,740–1,813 psi)\u003c\/td\u003e\n\u003ctd\u003e120–125 bar (1,740–1,813 psi)\u003c\/td\u003e\n\u003ctd\u003e125–130 bar (1,813–1,885 psi)\u003c\/td\u003e\n\u003ctd\u003e125–130 bar (1,813–1,885 psi)\u003c\/td\u003e\n\u003ctd\u003e135–140 bar (1,958–2,031 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e50–100 L\/min (13.2–26.4 gpm)\u003c\/td\u003e\n\u003ctd\u003e50–100 L\/min (13.2–26.4 gpm)\u003c\/td\u003e\n\u003ctd\u003e60–110 L\/min (15.9–29.1 gpm)\u003c\/td\u003e\n\u003ctd\u003e70–120 L\/min (18.5–31.7 gpm)\u003c\/td\u003e\n\u003ctd\u003e80–130 L\/min (21.1–34.3 gpm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool diameter\u003c\/th\u003e\n\u003ctd\u003e80 mm (3.1 in)\u003c\/td\u003e\n\u003ctd\u003e85 mm (3.3 in)\u003c\/td\u003e\n\u003ctd\u003e95 mm (3.7 in)\u003c\/td\u003e\n\u003ctd\u003e100 mm (3.9 in)\u003c\/td\u003e\n\u003ctd\u003e115 mm (4.5 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp\u003e\u003cem\u003eSpecifications as published by RAMEX (RAMEX brochure \"RAMEX RAM SERIES HYDRAULIC BREAKERS\", Medium Series table). US-unit figures are converted from the metric values and rounded. We confirm the exact model and configuration with your quote.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cp\u003ePick the model by carrier weight, then confirm your auxiliary flow and pressure against the table.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eRAMEX standard warranty: 12 months or 1,000 operating hours, whichever comes first. We confirm the full warranty terms with your quote.\u003c\/p\u003e\u003ch2\u003eLead time and delivery\u003c\/h2\u003e\u003cp\u003eTypically built to order. When no finished unit is available, RAMEX typically quotes 10–12 weeks of production, plus ocean freight to the US. Ask about ready units: we confirm current availability, lead time and a delivered price to your site with every quote. Delivered pricing is quoted per job.\u003c\/p\u003e\u003ch2\u003eRequest a quote\u003c\/h2\u003e\u003cp\u003eThis machine is sold by quote. Use \u003cstrong\u003eRequest a Quote\u003c\/strong\u003e and include your carrier's make, model and operating weight, its auxiliary hydraulic flow and relief pressure, the job (pile type, material or application) and your delivery ZIP code.\u003c\/p\u003e","brand":"RAMEX","offers":[{"title":"RAM 338","offer_id":50891023253669,"sku":"RAM 338","price":0.0,"currency_code":"USD","in_stock":false},{"title":"RAM 345","offer_id":50891023286437,"sku":"RAM 345","price":0.0,"currency_code":"USD","in_stock":false},{"title":"RAM 465 HSA","offer_id":50891023319205,"sku":"RAM 465 HSA","price":0.0,"currency_code":"USD","in_stock":false},{"title":"RAM 495 HSA","offer_id":50891023351973,"sku":"RAM 495 HSA","price":0.0,"currency_code":"USD","in_stock":false},{"title":"RAM 525 HSA","offer_id":50891023384741,"sku":"RAM 525 HSA","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/ramex-ram-medium-series-hydraulic-breaker-on-a-white-background.jpg?v=1792904225"},{"product_id":"ramex-ram-555-715-hsa-hydraulic-breaker","title":"RAMEX RAM 555–715 HSA Breaker for 18–32 Metric Ton Excavators","description":"\u003cp\u003eThe RAM 555, 675 and 715 HSA are RAMEX's medium-to-heavy tonnage hydraulic breakers for 18–32 metric ton excavators — the class used in quarries, road construction, tunnel work and heavy excavation. The chassis is reinforced with Hardox materials, and the impact rate can be adjusted to match the ground.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThree models for 18–32 metric ton carriers\u003c\/li\u003e\n\u003cli\u003eHardox-reinforced chassis\u003c\/li\u003e\n\u003cli\u003eAdjustable impact rate: tune speed and power to the ground\u003c\/li\u003e\n\u003cli\u003eReinforced armor plates at critical wear points\u003c\/li\u003e\n\u003cli\u003eTool diameters from 125 to 145 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cdiv class=\"table-wrapper\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRAM 555 HSA\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRAM 675 HSA\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRAM 715 HSA\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCarrier weight\u003c\/th\u003e\n\u003ctd\u003e18–25 t (39,700–55,100 lb)\u003c\/td\u003e\n\u003ctd\u003e22–29 t (48,500–63,900 lb)\u003c\/td\u003e\n\u003ctd\u003e26–32 t (57,300–70,500 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating weight\u003c\/th\u003e\n\u003ctd\u003e1,580 kg (3,483 lb)\u003c\/td\u003e\n\u003ctd\u003e1,900 kg (4,189 lb)\u003c\/td\u003e\n\u003ctd\u003e2,250 kg (4,960 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating pressure\u003c\/th\u003e\n\u003ctd\u003e135–140 bar (1,958–2,031 psi)\u003c\/td\u003e\n\u003ctd\u003e140–145 bar (2,031–2,103 psi)\u003c\/td\u003e\n\u003ctd\u003e135–140 bar (1,958–2,031 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eImpact rate\u003c\/th\u003e\n\u003ctd\u003e360–550 blows\/min\u003c\/td\u003e\n\u003ctd\u003e360–550 blows\/min\u003c\/td\u003e\n\u003ctd\u003e370–490 blows\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e100–150 L\/min (26.4–39.6 gpm)\u003c\/td\u003e\n\u003ctd\u003e120–180 L\/min (31.7–47.6 gpm)\u003c\/td\u003e\n\u003ctd\u003e160–210 L\/min (42.3–55.5 gpm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool diameter\u003c\/th\u003e\n\u003ctd\u003e125 mm (4.9 in)\u003c\/td\u003e\n\u003ctd\u003e135 mm (5.3 in)\u003c\/td\u003e\n\u003ctd\u003e145 mm (5.7 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp\u003e\u003cem\u003eSpecifications as published by RAMEX (RAMEX brochure \"RAMEX RAM SERIES HYDRAULIC BREAKERS\", Medium and Heavy Tonnage Series table). US-unit figures are converted from the metric values and rounded. We confirm the exact model and configuration with your quote.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cp\u003ePick the model by carrier weight, then confirm your auxiliary flow and pressure against the table.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eRAMEX standard warranty: 12 months or 1,000 operating hours, whichever comes first. We confirm the full warranty terms with your quote.\u003c\/p\u003e\u003ch2\u003eLead time and delivery\u003c\/h2\u003e\u003cp\u003eTypically built to order. When no finished unit is available, RAMEX typically quotes 10–12 weeks of production, plus ocean freight to the US. Ask about ready units: we confirm current availability, lead time and a delivered price to your site with every quote. Delivered pricing is quoted per job.\u003c\/p\u003e\u003ch2\u003eRequest a quote\u003c\/h2\u003e\u003cp\u003eThis machine is sold by quote. Use \u003cstrong\u003eRequest a Quote\u003c\/strong\u003e and include your carrier's make, model and operating weight, its auxiliary hydraulic flow and relief pressure, the job (pile type, material or application) and your delivery ZIP code.\u003c\/p\u003e","brand":"RAMEX","offers":[{"title":"RAM 555 HSA","offer_id":50891023515813,"sku":"RAM 555 HSA","price":0.0,"currency_code":"USD","in_stock":false},{"title":"RAM 675 HSA","offer_id":50891023548581,"sku":"RAM 675 HSA","price":0.0,"currency_code":"USD","in_stock":false},{"title":"RAM 715 HSA","offer_id":50891023581349,"sku":"RAM 715 HSA","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/ramex-ram-555-715-hsa-hydraulic-breaker-on-a-white-background.jpg?v=1792904226"},{"product_id":"ramex-ram-giants-series-hydraulic-breaker","title":"RAMEX RAM Giants Hydraulic Breaker for 32–100 Metric Ton Excavators","description":"\u003cp\u003eThe RAMEX RAM Giants Series is the extra-reinforced, heavy-duty breaker line for 32–100 metric ton excavators, built for granite, basalt, marble and other hard rock in mining and quarry work. Five models run from the 2,550 kg (5,622 lb) RAM 755 HSA to the 7,150 kg (15,763 lb) RAM 1705 HSA.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtra-reinforced lower housing and thick Hardox armored plates for abrasive mining conditions\u003c\/li\u003e\n\u003cli\u003eHigh-capacity membrane accumulator absorbs pressure surges and protects the carrier's hydraulic system\u003c\/li\u003e\n\u003cli\u003eTool diameters from 150 to 210 mm\u003c\/li\u003e\n\u003cli\u003eFive models for 32–100 metric ton carriers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cdiv class=\"table-wrapper\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRAM 755 HSA\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRAM 885 HSA\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRAM 965 HSA\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRAM 1505 HSA\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRAM 1705 HSA\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCarrier weight\u003c\/th\u003e\n\u003ctd\u003e32–39 t (70,500–86,000 lb)\u003c\/td\u003e\n\u003ctd\u003e35–45 t (77,200–99,200 lb)\u003c\/td\u003e\n\u003ctd\u003e45–55 t (99,200–121,300 lb)\u003c\/td\u003e\n\u003ctd\u003e50–65 t (110,200–143,300 lb)\u003c\/td\u003e\n\u003ctd\u003e65–100 t (143,300–220,500 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating weight\u003c\/th\u003e\n\u003ctd\u003e2,550 kg (5,622 lb)\u003c\/td\u003e\n\u003ctd\u003e3,000 kg (6,614 lb)\u003c\/td\u003e\n\u003ctd\u003e3,900 kg (8,598 lb)\u003c\/td\u003e\n\u003ctd\u003e4,650 kg (10,251 lb)\u003c\/td\u003e\n\u003ctd\u003e7,150 kg (15,763 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating pressure\u003c\/th\u003e\n\u003ctd\u003e140–145 bar (2,031–2,103 psi)\u003c\/td\u003e\n\u003ctd\u003e140–145 bar (2,031–2,103 psi)\u003c\/td\u003e\n\u003ctd\u003e145–150 bar (2,103–2,176 psi)\u003c\/td\u003e\n\u003ctd\u003e150–155 bar (2,176–2,248 psi)\u003c\/td\u003e\n\u003ctd\u003e155–160 bar (2,248–2,321 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eImpact rate\u003c\/th\u003e\n\u003ctd\u003e390–540 blows\/min\u003c\/td\u003e\n\u003ctd\u003e380–480 blows\/min\u003c\/td\u003e\n\u003ctd\u003e370–450 blows\/min\u003c\/td\u003e\n\u003ctd\u003e330–440 blows\/min\u003c\/td\u003e\n\u003ctd\u003e250–350 blows\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e190–240 L\/min (50.2–63.4 gpm)\u003c\/td\u003e\n\u003ctd\u003e210–260 L\/min (55.5–68.7 gpm)\u003c\/td\u003e\n\u003ctd\u003e230–300 L\/min (60.8–79.3 gpm)\u003c\/td\u003e\n\u003ctd\u003e250–350 L\/min (66–92.5 gpm)\u003c\/td\u003e\n\u003ctd\u003e220–270 L\/min (58.1–71.3 gpm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool diameter\u003c\/th\u003e\n\u003ctd\u003e150 mm (5.9 in)\u003c\/td\u003e\n\u003ctd\u003e160 mm (6.3 in)\u003c\/td\u003e\n\u003ctd\u003e175 mm (6.9 in)\u003c\/td\u003e\n\u003ctd\u003e190 mm (7.5 in)\u003c\/td\u003e\n\u003ctd\u003e210 mm (8.3 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp\u003e\u003cem\u003eSpecifications as published by RAMEX (RAMEX brochure \"RAMEX RAM SERIES HYDRAULIC BREAKERS\", Giants Series table). US-unit figures are converted from the metric values and rounded. We confirm the exact model and configuration with your quote.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cp\u003ePick the model by carrier weight, then confirm your auxiliary flow and pressure against the table.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eRAMEX standard warranty: 12 months or 1,000 operating hours, whichever comes first. We confirm the full warranty terms with your quote.\u003c\/p\u003e\u003ch2\u003eLead time and delivery\u003c\/h2\u003e\u003cp\u003eTypically built to order. When no finished unit is available, RAMEX typically quotes 10–12 weeks of production, plus ocean freight to the US. Ask about ready units: we confirm current availability, lead time and a delivered price to your site with every quote. Delivered pricing is quoted per job.\u003c\/p\u003e\u003ch2\u003eRequest a quote\u003c\/h2\u003e\u003cp\u003eThis machine is sold by quote. Use \u003cstrong\u003eRequest a Quote\u003c\/strong\u003e and include your carrier's make, model and operating weight, its auxiliary hydraulic flow and relief pressure, the job (pile type, material or application) and your delivery ZIP code.\u003c\/p\u003e","brand":"RAMEX","offers":[{"title":"RAM 755 HSA","offer_id":50891023614117,"sku":"RAM 755 HSA","price":0.0,"currency_code":"USD","in_stock":false},{"title":"RAM 885 HSA","offer_id":50891023646885,"sku":"RAM 885 HSA","price":0.0,"currency_code":"USD","in_stock":false},{"title":"RAM 965 HSA","offer_id":50891023679653,"sku":"RAM 965 HSA","price":0.0,"currency_code":"USD","in_stock":false},{"title":"RAM 1505 HSA","offer_id":50891023712421,"sku":"RAM 1505 HSA","price":0.0,"currency_code":"USD","in_stock":false},{"title":"RAM 1705 HSA","offer_id":50891023745189,"sku":"RAM 1705 HSA","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/ramex-ram-giants-series-hydraulic-breaker-on-a-white-background.jpg?v=1792904228"},{"product_id":"ramex-ram-fx-sx-gas-type-hydraulic-breaker","title":"RAMEX RAM FX \u0026 SX Gas-Type Breaker, 11–55 Metric Ton Carriers","description":"\u003cp\u003eRAMEX RAM FX and SX Series are gas-type hydraulic breakers with hydraulic accumulator support. FX models are built for high speed and efficiency, SX models are the stronger heavy-duty option, and together they cover carriers from 11 to 55 metric tons — up to 12,000 joules of impact energy on the largest model, for marble quarries and excavation work that needs continuous production.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTop gas technology: high gas pressure returns the piston faster for a higher impact rate\u003c\/li\u003e\n\u003cli\u003eAnti-shock accumulator absorbs pressure fluctuations and protects the carrier's hydraulic system\u003c\/li\u003e\n\u003cli\u003eHeat control: open-body design prevents swelling in hot climates\u003c\/li\u003e\n\u003cli\u003eQuick disassembly and replaceable components for on-site service\u003c\/li\u003e\n\u003cli\u003eImpact energy published for the FX150–FX440 and SX 500A\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cdiv class=\"table-wrapper\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eFX 150\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eFX 220\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eFX 330\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eFX 440\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSX 500A\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSX 100\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSX 160\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSX 170 A\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSX 180 A\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSX 190 A\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSX 200 A\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSX 300 A\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCarrier weight\u003c\/th\u003e\n\u003ctd\u003e12–18 t (26,500–39,700 lb)\u003c\/td\u003e\n\u003ctd\u003e18–25 t (39,700–55,100 lb)\u003c\/td\u003e\n\u003ctd\u003e25–32 t (55,100–70,500 lb)\u003c\/td\u003e\n\u003ctd\u003e32–44 t (70,500–97,000 lb)\u003c\/td\u003e\n\u003ctd\u003e40–55 t (88,200–121,300 lb)\u003c\/td\u003e\n\u003ctd\u003e11–16 t (24,300–35,300 lb)\u003c\/td\u003e\n\u003ctd\u003e13–20 t (28,700–44,100 lb)\u003c\/td\u003e\n\u003ctd\u003e16–23 t (35,300–50,700 lb)\u003c\/td\u003e\n\u003ctd\u003e18–26 t (39,700–57,300 lb)\u003c\/td\u003e\n\u003ctd\u003e25–30 t (55,100–66,100 lb)\u003c\/td\u003e\n\u003ctd\u003e28–35 t (61,700–77,200 lb)\u003c\/td\u003e\n\u003ctd\u003e35–45 t (77,200–99,200 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating weight\u003c\/th\u003e\n\u003ctd\u003e1,200 kg (2,646 lb)\u003c\/td\u003e\n\u003ctd\u003e1,700 kg (3,748 lb)\u003c\/td\u003e\n\u003ctd\u003e2,200 kg (4,850 lb)\u003c\/td\u003e\n\u003ctd\u003e2,700 kg (5,952 lb)\u003c\/td\u003e\n\u003ctd\u003e3,990 kg (8,796 lb)\u003c\/td\u003e\n\u003ctd\u003e950 kg (2,094 lb)\u003c\/td\u003e\n\u003ctd\u003e1,295 kg (2,855 lb)\u003c\/td\u003e\n\u003ctd\u003e1,550 kg (3,417 lb)\u003c\/td\u003e\n\u003ctd\u003e1,825 kg (4,023 lb)\u003c\/td\u003e\n\u003ctd\u003e2,065 kg (4,553 lb)\u003c\/td\u003e\n\u003ctd\u003e2,560 kg (5,644 lb)\u003c\/td\u003e\n\u003ctd\u003e2,850 kg (6,283 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eImpact energy\u003c\/th\u003e\n\u003ctd\u003e2,956 J (2,180 ft·lbf)\u003c\/td\u003e\n\u003ctd\u003e3,588 J (2,646 ft·lbf)\u003c\/td\u003e\n\u003ctd\u003e7,000 J (5,163 ft·lbf)\u003c\/td\u003e\n\u003ctd\u003e9,900 J (7,302 ft·lbf)\u003c\/td\u003e\n\u003ctd\u003e12,000 J (8,851 ft·lbf)\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eImpact rate\u003c\/th\u003e\n\u003ctd\u003e450–900 blows\/min\u003c\/td\u003e\n\u003ctd\u003e400–800 blows\/min\u003c\/td\u003e\n\u003ctd\u003e350–700 blows\/min\u003c\/td\u003e\n\u003ctd\u003e300–600 blows\/min\u003c\/td\u003e\n\u003ctd\u003e200–350 blows\/min\u003c\/td\u003e\n\u003ctd\u003e350–700 blows\/min\u003c\/td\u003e\n\u003ctd\u003e350–650 blows\/min\u003c\/td\u003e\n\u003ctd\u003e350–600 blows\/min\u003c\/td\u003e\n\u003ctd\u003e300–500 blows\/min\u003c\/td\u003e\n\u003ctd\u003e300–450 blows\/min\u003c\/td\u003e\n\u003ctd\u003e250–400 blows\/min\u003c\/td\u003e\n\u003ctd\u003e300–450 blows\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating pressure\u003c\/th\u003e\n\u003ctd\u003e150–170 bar (2,176–2,466 psi)\u003c\/td\u003e\n\u003ctd\u003e160–180 bar (2,321–2,611 psi)\u003c\/td\u003e\n\u003ctd\u003e160–180 bar (2,321–2,611 psi)\u003c\/td\u003e\n\u003ctd\u003e160–180 bar (2,321–2,611 psi)\u003c\/td\u003e\n\u003ctd\u003e160–180 bar (2,321–2,611 psi)\u003c\/td\u003e\n\u003ctd\u003e150–170 bar (2,176–2,466 psi)\u003c\/td\u003e\n\u003ctd\u003e150–170 bar (2,176–2,466 psi)\u003c\/td\u003e\n\u003ctd\u003e160–180 bar (2,321–2,611 psi)\u003c\/td\u003e\n\u003ctd\u003e160–180 bar (2,321–2,611 psi)\u003c\/td\u003e\n\u003ctd\u003e160–180 bar (2,321–2,611 psi)\u003c\/td\u003e\n\u003ctd\u003e160–180 bar (2,321–2,611 psi)\u003c\/td\u003e\n\u003ctd\u003e160–180 bar (2,321–2,611 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e90–120 L\/min (23.8–31.7 gpm)\u003c\/td\u003e\n\u003ctd\u003e125–150 L\/min (33–39.6 gpm)\u003c\/td\u003e\n\u003ctd\u003e150–190 L\/min (39.6–50.2 gpm)\u003c\/td\u003e\n\u003ctd\u003e190–250 L\/min (50.2–66 gpm)\u003c\/td\u003e\n\u003ctd\u003e210–290 L\/min (55.5–76.6 gpm)\u003c\/td\u003e\n\u003ctd\u003e80–110 L\/min (21.1–29.1 gpm)\u003c\/td\u003e\n\u003ctd\u003e90–120 L\/min (23.8–31.7 gpm)\u003c\/td\u003e\n\u003ctd\u003e100–150 L\/min (26.4–39.6 gpm)\u003c\/td\u003e\n\u003ctd\u003e120–180 L\/min (31.7–47.6 gpm)\u003c\/td\u003e\n\u003ctd\u003e150–210 L\/min (39.6–55.5 gpm)\u003c\/td\u003e\n\u003ctd\u003e180–240 L\/min (47.6–63.4 gpm)\u003c\/td\u003e\n\u003ctd\u003e200–260 L\/min (52.8–68.7 gpm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool diameter\u003c\/th\u003e\n\u003ctd\u003e120 mm (4.7 in)\u003c\/td\u003e\n\u003ctd\u003e135 mm (5.3 in)\u003c\/td\u003e\n\u003ctd\u003e150 mm (5.9 in)\u003c\/td\u003e\n\u003ctd\u003e160 mm (6.3 in)\u003c\/td\u003e\n\u003ctd\u003e175 mm (6.9 in)\u003c\/td\u003e\n\u003ctd\u003e100 mm (3.9 in)\u003c\/td\u003e\n\u003ctd\u003e125 mm (4.9 in)\u003c\/td\u003e\n\u003ctd\u003e135 mm (5.3 in)\u003c\/td\u003e\n\u003ctd\u003e140 mm (5.5 in)\u003c\/td\u003e\n\u003ctd\u003e150 mm (5.9 in)\u003c\/td\u003e\n\u003ctd\u003e155 mm (6.1 in)\u003c\/td\u003e\n\u003ctd\u003e165 mm (6.5 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp\u003e\u003cem\u003eSpecifications as published by RAMEX (RAMEX brochure \"RAMEX RAM SERIES HYDRAULIC BREAKERS\", FX and SX Series technical data). US-unit figures are converted from the metric values and rounded. We confirm the exact model and configuration with your quote.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cp\u003ePick the model by carrier weight, then confirm your auxiliary flow and pressure against the table.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eRAMEX standard warranty: 12 months or 1,000 operating hours, whichever comes first. We confirm the full warranty terms with your quote.\u003c\/p\u003e\u003ch2\u003eLead time and delivery\u003c\/h2\u003e\u003cp\u003eTypically built to order. When no finished unit is available, RAMEX typically quotes 10–12 weeks of production, plus ocean freight to the US. Ask about ready units: we confirm current availability, lead time and a delivered price to your site with every quote. Delivered pricing is quoted per job.\u003c\/p\u003e\u003ch2\u003eRequest a quote\u003c\/h2\u003e\u003cp\u003eThis machine is sold by quote. Use \u003cstrong\u003eRequest a Quote\u003c\/strong\u003e and include your carrier's make, model and operating weight, its auxiliary hydraulic flow and relief pressure, the job (pile type, material or application) and your delivery ZIP code.\u003c\/p\u003e","brand":"RAMEX","offers":[{"title":"RAM FX 150","offer_id":50891023777957,"sku":"RAM FX 150","price":0.0,"currency_code":"USD","in_stock":false},{"title":"RAM FX 220","offer_id":50891023810725,"sku":"RAM FX 220","price":0.0,"currency_code":"USD","in_stock":false},{"title":"RAM FX 330","offer_id":50891023843493,"sku":"RAM FX 330","price":0.0,"currency_code":"USD","in_stock":false},{"title":"RAM FX 440","offer_id":50891023876261,"sku":"RAM FX 440","price":0.0,"currency_code":"USD","in_stock":false},{"title":"RAM SX 500A","offer_id":50891023909029,"sku":"RAM SX 500A","price":0.0,"currency_code":"USD","in_stock":false},{"title":"RAM SX 100","offer_id":50891023941797,"sku":"RAM SX 100","price":0.0,"currency_code":"USD","in_stock":false},{"title":"RAM SX 160","offer_id":50891023974565,"sku":"RAM SX 160","price":0.0,"currency_code":"USD","in_stock":false},{"title":"RAM SX 170 A","offer_id":50891024007333,"sku":"RAM SX 170 A","price":0.0,"currency_code":"USD","in_stock":false},{"title":"RAM SX 180 A","offer_id":50891024040101,"sku":"RAM SX 180 A","price":0.0,"currency_code":"USD","in_stock":false},{"title":"RAM SX 190 A","offer_id":50891024072869,"sku":"RAM SX 190 A","price":0.0,"currency_code":"USD","in_stock":false},{"title":"RAM SX 200 A","offer_id":50891024105637,"sku":"RAM SX 200 A","price":0.0,"currency_code":"USD","in_stock":false},{"title":"RAM SX 300 A","offer_id":50891024138405,"sku":"RAM SX 300 A","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/ramex-ram-fx-sx-gas-type-hydraulic-breaker-on-a-white-background.jpg?v=1792904229"},{"product_id":"ramex-rvr-excavator-vibro-ripper","title":"RAMEX RVR Excavator Vibro Ripper for 20–70 Metric Ton Carriers","description":"\u003cp\u003eRAMEX RVR vibro rippers break rock and hard ground on 20–70 metric ton excavators where drilling and blasting are not permitted for safety or environmental reasons. RAMEX rates them at three to five times the productivity of a conventional hydraulic breaker, with lower noise and dust.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFour high-mass eccentric weights in a symmetrical vertical arrangement for a concentrated vertical impact\u003c\/li\u003e\n\u003cli\u003eDual air-spring system with stud bumpers for shock absorption\u003c\/li\u003e\n\u003cli\u003eSingle-link connection for fast inspection and maintenance\u003c\/li\u003e\n\u003cli\u003eOptional tool holder for tooth and chisel tools; chisel versions published for the RVR 45, 55 and 85\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cdiv class=\"table-wrapper\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRVR 20\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRVR 30\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRVR 45\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRVR 55\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRVR 85\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCarrier weight range\u003c\/th\u003e\n\u003ctd\u003e20–28 t (44,100–61,700 lb)\u003c\/td\u003e\n\u003ctd\u003e29–36 t (63,900–79,400 lb)\u003c\/td\u003e\n\u003ctd\u003e37–46 t (81,600–101,400 lb)\u003c\/td\u003e\n\u003ctd\u003e47–65 t (103,600–143,300 lb)\u003c\/td\u003e\n\u003ctd\u003e70 t (154,300 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFrequency\u003c\/th\u003e\n\u003ctd\u003e2,500–3,000 blows\/min\u003c\/td\u003e\n\u003ctd\u003e2,500–2,800 blows\/min\u003c\/td\u003e\n\u003ctd\u003e1,700–1,800 blows\/min\u003c\/td\u003e\n\u003ctd\u003e1,600–1,700 blows\/min\u003c\/td\u003e\n\u003ctd\u003e1,400–1,500 blows\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSetting pressure\u003c\/th\u003e\n\u003ctd\u003e250 bar (3,626 psi)\u003c\/td\u003e\n\u003ctd\u003e250 bar (3,626 psi)\u003c\/td\u003e\n\u003ctd\u003e280 bar (4,061 psi)\u003c\/td\u003e\n\u003ctd\u003e280 bar (4,061 psi)\u003c\/td\u003e\n\u003ctd\u003e280 bar (4,061 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eReturn pressure\u003c\/th\u003e\n\u003ctd\u003e6 bar (87 psi)\u003c\/td\u003e\n\u003ctd\u003e6 bar (87 psi)\u003c\/td\u003e\n\u003ctd\u003e6 bar (87 psi)\u003c\/td\u003e\n\u003ctd\u003e6 bar (87 psi)\u003c\/td\u003e\n\u003ctd\u003e6 bar (87 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRequired oil flow\u003c\/th\u003e\n\u003ctd\u003e180–200 L\/min (47.6–52.8 gpm)\u003c\/td\u003e\n\u003ctd\u003e220–240 L\/min (58.1–63.4 gpm)\u003c\/td\u003e\n\u003ctd\u003e260–280 L\/min (68.7–74 gpm)\u003c\/td\u003e\n\u003ctd\u003e300–320 L\/min (79.3–84.5 gpm)\u003c\/td\u003e\n\u003ctd\u003e380–420 L\/min (100.4–111 gpm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eService weight, tooth\u003c\/th\u003e\n\u003ctd\u003e2,850 kg (6,283 lb)\u003c\/td\u003e\n\u003ctd\u003e3,750 kg (8,267 lb)\u003c\/td\u003e\n\u003ctd\u003e4,780 kg (10,538 lb)\u003c\/td\u003e\n\u003ctd\u003e5,780 kg (12,743 lb)\u003c\/td\u003e\n\u003ctd\u003e9,800 kg (21,605 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eL × W × H, tooth\u003c\/th\u003e\n\u003ctd\u003e2,945 × 1,350 × 822 mm (115.9 × 53.1 × 32.4 in)\u003c\/td\u003e\n\u003ctd\u003e3,181 × 1,455 × 900 mm (125.2 × 57.3 × 35.4 in)\u003c\/td\u003e\n\u003ctd\u003e3,433 × 1,551 × 986 mm (135.2 × 61.1 × 38.8 in)\u003c\/td\u003e\n\u003ctd\u003e3,627 × 1,617 × 1,090 mm (142.8 × 63.7 × 42.9 in)\u003c\/td\u003e\n\u003ctd\u003e4,211 × 1,908 × 1,272 mm (165.8 × 75.1 × 50.1 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eService weight, chisel\u003c\/th\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e4,880 kg (10,759 lb)\u003c\/td\u003e\n\u003ctd\u003e5,930 kg (13,073 lb)\u003c\/td\u003e\n\u003ctd\u003e9,950 kg (21,936 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eL × W × H, chisel\u003c\/th\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e3,484 × 1,551 × 986 mm (137.2 × 61.1 × 38.8 in)\u003c\/td\u003e\n\u003ctd\u003e3,690 × 1,617 × 1,090 mm (145.3 × 63.7 × 42.9 in)\u003c\/td\u003e\n\u003ctd\u003e4,280 × 1,908 × 1,272 mm (168.5 × 75.1 × 50.1 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChisel tool size (ø × length)\u003c\/th\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e130 × 1,200 mm (5.1 × 47.2 in)\u003c\/td\u003e\n\u003ctd\u003e140 × 1,300 mm (5.5 × 51.2 in)\u003c\/td\u003e\n\u003ctd\u003e160 × 1,435 mm (6.3 × 56.5 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp\u003e\u003cem\u003eSpecifications as published by RAMEX (RAMEX website, Vibro Rippers page). US-unit figures are converted from the metric values and rounded. We confirm the exact model and configuration with your quote.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cp\u003ePick the model by carrier weight, then confirm your auxiliary flow and pressure against the table.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eRAMEX standard warranty: 12 months or 1,000 operating hours, whichever comes first. We confirm the full warranty terms with your quote.\u003c\/p\u003e\u003ch2\u003eLead time and delivery\u003c\/h2\u003e\u003cp\u003eTypically built to order. When no finished unit is available, RAMEX typically quotes 10–12 weeks of production, plus ocean freight to the US. Ask about ready units: we confirm current availability, lead time and a delivered price to your site with every quote. Delivered pricing is quoted per job.\u003c\/p\u003e\u003ch2\u003eRequest a quote\u003c\/h2\u003e\u003cp\u003eThis machine is sold by quote. Use \u003cstrong\u003eRequest a Quote\u003c\/strong\u003e and include your carrier's make, model and operating weight, its auxiliary hydraulic flow and relief pressure, the job (pile type, material or application) and your delivery ZIP code.\u003c\/p\u003e","brand":"RAMEX","offers":[{"title":"RVR 20","offer_id":50891025842341,"sku":"RVR 20","price":0.0,"currency_code":"USD","in_stock":false},{"title":"RVR 30","offer_id":50891025875109,"sku":"RVR 30","price":0.0,"currency_code":"USD","in_stock":false},{"title":"RVR 45","offer_id":50891025907877,"sku":"RVR 45","price":0.0,"currency_code":"USD","in_stock":false},{"title":"RVR 55","offer_id":50891025940645,"sku":"RVR 55","price":0.0,"currency_code":"USD","in_stock":false},{"title":"RVR 85","offer_id":50891025973413,"sku":"RVR 85","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0454\/1916\/7909\/files\/ramex-rvr-excavator-vibro-ripper-on-a-tracked-excavator-breaking-ground.jpg?v=1792904241"}],"url":"https:\/\/www.urbansupplyinc.com\/collections\/excavator-attachments-20-metric-ton-and-up.oembed","provider":"Urban Supply Incorporated","version":"1.0","type":"link"}